Roth-λογότυπο

Σύστημα Roth QuickTemp Compact

Roth-QuickTemp-Compact-System-Product

Προδιαγραφές προϊόντος

  • Διαστάσεις: 61 cm x 61 cm x 40 cm
  • Μέγιστο φορτίο: 2 χιλιοστά ανά μέτρο
  • Απαιτείται συναρμολόγηση

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Vacuum the subfloor. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Grooves between plates must be aligned.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Use transfer plates for feed pipes/to fill gaps.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Install pipe tight/close to the inner circle in turns.

Roth-QuickTemp-Compact-System-Fig- (11)

Install pipes and perform pressure test.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Βήματα εγκατάστασης

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Ελέγξτε τη σταθερότητα και κάντε προσαρμογές εάν είναι απαραίτητο.
  8. Το προϊόν σας είναι τώρα έτοιμο για χρήση!

Συχνές ερωτήσεις

Ποια είναι η μέγιστη χωρητικότητα φορτίου του προϊόντος;

The maximum load capacity is 2mm per meter.

Χρειάζομαι πρόσθετα εργαλεία για τη συναρμολόγηση;

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Μπορεί το προϊόν να αποσυναρμολογηθεί για αποθήκευση;

Yes, the product can be disassembled following the reverse order of the installation steps.

Έγγραφα / Πόροι

Σύστημα Roth QuickTemp Compact [pdf] Οδηγός εγκατάστασης
Σύστημα QuickTemp Compact, QuickTemp, Σύστημα Compact, Σύστημα

Αναφορές

Αφήστε ένα σχόλιο

Η διεύθυνση email σας δεν θα δημοσιευτεί. Τα υποχρεωτικά πεδία επισημαίνονται *