1. Εισαγωγή και Πάνωview
This manual provides detailed instructions for the installation, operation, and maintenance of your OSD Audio IWS88 In-Wall Subwoofer and SMP800 Class D Mono Amplifier bundle. This system is designed to deliver powerful, deep bass for home theater and audio systems while integrating discreetly into your living space.
Το πακέτο περιλαμβάνει:
- IWS88 In-Wall Subwoofer: A passive subwoofer featuring dual 8-inch drivers, designed for flush installation within a wall. It handles up to 350W of power.
- SMP800 Class D Mono Ampπιο ζωντανός: An 800W amplifier specifically designed to power passive subwoofers. It features Class D efficiency, variable crossover, phase control, auto-on sensing, and versatile input options (RCA/LFE, Speaker Level, 12V Trigger).
For optimal performance and safety, please read this manual thoroughly before installation and use.
2. Οδηγίες ασφαλείας
Please observe the following safety precautions to prevent damage to the unit and ensure user safety:
- Ηλεκτρική ασφάλεια: Αποσυνδέετε πάντα το amplifier from the power outlet before performing any service or installation. Ensure proper grounding. Do not expose the ampλυτρωτικό στη βροχή ή την υγρασία.
- Αερισμός: Ο amplifier requires adequate ventilation. Do not block any ventilation openings. Install the amplifier in a location with sufficient airflow.
- Τοποθέτηση: Install the in-wall subwoofer and amplifier in locations free from excessive heat, humidity, dust, or vibration. Keep the amplifier away from direct sunlight and heat sources.
- Καλωδίωση: Ensure all wiring connections are secure and correct before powering on the system. Incorrect wiring can cause damage to the equipment.
- Εξυπηρέτηση: Μην επιχειρήσετε να επισκευάσετε αυτό το προϊόν μόνοι σας. Αναφέρετε όλα τα σέρβις σε εξειδικευμένο προσωπικό σέρβις.
3. Περιεχόμενα συσκευασίας
Βεβαιωθείτε ότι όλα τα στοιχεία υπάρχουν στη συσκευασία:
- OSD Audio IWS88 In-Wall Subwoofer
- OSD Audio SMP800 Class D Mono Ampπιο ζωντανή
- Removable Grille for IWS88 Subwoofer
- Power Cable for SMP800 Ampπιο ζωντανή
- Εγχειρίδιο οδηγιών (αυτό το έγγραφο)
- Mounting Hardware (integrated dog-ear clamps for subwoofer)
4. Ρύθμιση και εγκατάσταση
4.1 In-Wall Subwoofer Installation (IWS88)
- Επιλέξτε Τοποθεσία: Select a suitable wall location, ensuring no obstructions like electrical wiring, plumbing, or studs are present. Use a stud finder to locate studs and avoid them.
- Άνοιγμα κοπής: Use the provided cutout template (if included, otherwise measure carefully) to mark the opening on the wall. Carefully cut the opening using a drywall saw.
- Εκτελέστε το καλώδιο του ηχείου: Route appropriate gauge speaker wire (e.g., 14-gauge or 12-gauge) from the amplifier location to the subwoofer opening. Leave enough slack for connections.
- Σύνδεση καλωδίου ηχείου: Connect the speaker wires to the spring-loaded terminals on the IWS88 subwoofer. Ensure correct polarity (+ to + and - to -).
Εικόνα: Μπροστά view of the IWS88 In-Wall Subwoofer with the grille removed, revealing the dual 8-inch drivers and the speaker wire terminals.
Εικόνα: Γωνιακή view of the IWS88 In-Wall Subwoofer, illustrating its internal components, mounting clamps, and speaker terminals.
- Mount Subwoofer: Carefully insert the subwoofer into the wall opening. Tighten the mounting screws (usually located on the front baffle) which will engage the dog-ear clamps to secure the subwoofer to the drywall. Do not overtighten.
- Συνδέστε τη μάσκα: Once the subwoofer is securely mounted, attach the magnetic grille to the front of the subwoofer.
Εικόνα: Μπροστά view of the IWS88 In-Wall Subwoofer with the magnetic grille in place, demonstrating its flush and discreet appearance.
4.2 Amplifier Connection (SMP800)
Position the SMP800 amplifier in a well-ventilated area, preferably near your AV receiver or audio source.
Image: Rear panel of the SMP800 Class D Mono Amplifier, highlighting its input and output connections.
- Σύνδεση εισόδου ήχου:
- RCA/LFE Input: For most home theater receivers with a dedicated subwoofer output (LFE or Sub Out), connect an RCA cable from the receiver's subwoofer output to the SMP800's LFE input. If your receiver has stereo RCA outputs, use both L and R inputs on the SMP800.
- Είσοδος στάθμης ηχείου: If your receiver does not have a dedicated subwoofer output, connect speaker wires from your receiver's main speaker outputs to the SMP800's Speaker Level Input terminals.
- Connect Subwoofer Output: Connect the speaker wires from the IWS88 in-wall subwoofer to the SMP800's Subwoofer Speaker Output terminals. Ensure correct polarity (+ to + and - to -).
Image: Close-up of the SMP800 amplifier's subwoofer speaker output terminals.
Image: Close-up of the SMP800 amplifier's RCA/LFE inputs and speaker level inputs.
- Σκανδάλη 12V (Προαιρετική): If your AV receiver or control system has a 12V trigger output, connect it to the SMP800's 12V Trigger input. This allows the amplifier to power on/off automatically with your main system.
- Σύνδεση ρεύματος: Connect the supplied power cable to the SMP800 amplifier and then to a suitable AC power outlet. Ensure the AC Voltage Selector switch on the ampΤο lifier έχει ρυθμιστεί στη σωστή voltage για την περιοχή σας (110-120V ή 220-240V).
5. Οδηγίες λειτουργίας
5.1 Ενεργοποίηση/Απενεργοποίηση
- Χειροκίνητη ισχύς: Press the power button on the front panel of the SMP800 amplifier to turn it on or off.
- Auto-On Sensing: Αν το amplifier's 'MUSIC ON 12V' switch is set to 'MUSIC' and an audio signal is detected on the RCA/LFE or Speaker Level inputs, the amplifier will automatically power on. It will enter standby mode after a period of no audio signal.
- Ενεργοποιητής 12V: If connected, the amplifier will power on and off in sync with your main system.
5.2 Adjusting Controls (SMP800)
The SMP800 amplifier features several controls to optimize subwoofer performance:
- Όγκος/Κέρδος: Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase until the bass blends well with your main speakers.
- Συχνότητα Crossover: This control determines the highest frequency the subwoofer will reproduce. Set it to blend seamlessly with your main speakers. A common starting point is 80Hz-100Hz, but adjust based on your main speakers' low-frequency capabilities.
- Έλεγχος φάσης: Adjusts the phase of the subwoofer output (0° or 180°). Experiment with both settings to find the one that provides the most impactful and coherent bass response in your listening position.
6. Συντήρηση
To ensure the longevity and optimal performance of your OSD Audio subwoofer and amplifier, ακολουθήστε αυτές τις απλές οδηγίες συντήρησης:
- Καθάρισμα: Χρησιμοποιήστε ένα μαλακό, στεγνό πανί για να καθαρίσετε τις επιφάνειες του amplifier and subwoofer grille. Do not use liquid cleaners, aerosols, or abrasive chemicals, as they may damage the finish or internal components.
- Αερισμός: Ελέγχετε περιοδικά ότι το amplifier's ventilation openings are clear of dust and debris to prevent overheating.
- Συνδέσεις: Occasionally check all cable connections to ensure they are secure. Loose connections can lead to signal loss or intermittent performance.
- Περιβάλλο: Αποφύγετε την έκθεση του ampσωτήρας σε ακραίες θερμοκρασίες ή υγρασία.
7. Αντιμετώπιση Προβλημάτων
If you encounter issues with your OSD Audio subwoofer and amplifier bundle, refer to the following troubleshooting guide:
| Πρόβλημα | Πιθανή αιτία | Διάλυμα |
|---|---|---|
| Δεν υπάρχει ήχος από το υπογούφερ |
|
|
| Παραμορφωμένα ή ασαφή μπάσα |
|
|
| Βουητό ή βουητό |
|
|
| Amplifier not turning on automatically |
|
|
If the problem persists after trying these solutions, please contact OSD Audio customer support.
8. Προδιαγραφές
IWS88 In-Wall Subwoofer
- Τύπος: Passive In-Wall Subwoofer
- Οδηγοί: Dual 8-inch Woofers
- Power Handling: 350 Watt
- Αντίσταση: 8 Ωμ
- Απόκριση συχνότητας: Refer to product page for detailed specifications.
- Διαστάσεις: Refer to product page for detailed dimensions and cutout size.
SMP800 Class D Mono Ampπιο ζωντανή
- Ampπιο ζωντανός τύπος: Μονοφωνική τάξη Δ'
- Έξοδος ισχύος: 800 Watt (Μέγ.)
- Είσοδοι: RCA/LFE, Speaker Level, 12V Trigger
- Έξοδοι: Έξοδος ηχείου υπογούφερ
- Στοιχεία ελέγχου: Variable Crossover, Phase Control (0°/180°), Volume/Gain
- Χαρακτηριστικά: Auto-On Sensing
- AC Voltage: Selectable (110-120V / 220-240V)
- Διαστάσεις: Refer to product page for detailed dimensions.
9. Εγγύηση και υποστήριξη
9.1 Πληροφορίες εγγύησης
OSD Audio products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.
9.2 Υποστήριξη πελατών
For technical assistance, troubleshooting, or warranty inquiries, please visit the official OSD Audio website or contact their customer support department. Contact information can typically be found on the OSD Audio webστον ιστότοπο ή στη συσκευασία του προϊόντος.
Before contacting support, please have your product model numbers (IWS88 and SMP800) and a description of the issue ready.
