XCQQ S8L-Elongated Bidet Toilet Seat User Manual

1. Εισαγωγή

Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.

2. Σημαντικές πληροφορίες για την ασφάλεια

Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.

• Ηλεκτρολογικές απαιτήσεις: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
• Υδρευση: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
• Όριο βάρους: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
• Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
• Καθάρισμα: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
• Παιδιά και Άτομα με Μειωμένες Ικανότητες: Αυτή η συσκευή μπορεί να χρησιμοποιηθεί από παιδιά ηλικίας 8 ετών και άνω και άτομα με μειωμένες σωματικές, αισθητηριακές ή διανοητικές ικανότητες ή έλλειψη εμπειρίας και γνώσης, εάν τους έχει δοθεί επίβλεψη ή οδηγίες σχετικά με τη χρήση της συσκευής με ασφαλή τρόπο και κατανοούν τους κινδύνους που εμπεριέχονται . Τα παιδιά δεν πρέπει να παίζουν με τη συσκευή. Ο καθαρισμός και η συντήρηση από τον χρήστη δεν πρέπει να γίνονται από παιδιά χωρίς επίβλεψη.

3. Περιεχόμενα συσκευασίας

Βεβαιωθείτε ότι όλα τα εξαρτήματα είναι παρόντα πριν ξεκινήσετε την εγκατάσταση:

• XCQQ Bidet Toilet Seat
• 3-way Valve + DMT Pipe (Pre-Installed)
• Πλάκα στερέωσης
• Mounting Hardware (screws, rubber expansion nuts)
• Εγχειρίδιο οδηγιών (αυτό το έγγραφο)

4. Χαρακτηριστικά προϊόντος

The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

• Πλύσιμο με ζεστό νερό: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
• Θερμαινόμενο κάθισμα: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
• Στεγνωτήρας ζεστού αέρα: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
• Καπάκι Soft-close: Αποτρέπει το χτύπημα και μειώνει τον θόρυβο.
• Φως νύχτας: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
• Αυτοκαθαριζόμενο ακροφύσιο: A stainless steel nozzle that performs self-cleaning before and after each use.
• Οθόνη LED: Real-time display of water temperature, seat temperature, and drying temperature.
• Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outagμι).
• Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.

Image 4.1: Illustration of the heated toilet seat and warm air drying functions.

Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.

Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.

5. Οδηγός εγκατάστασης

Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.

Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.

Έλεγχος προεγκατάστασης:

• Turn off the water supply to your toilet.
• Ξεπλύνετε την τουαλέτα για να αδειάσει η δεξαμενή.
• Αφαιρέστε το υπάρχον κάθισμα και το καπάκι της τουαλέτας σας.

Βήμα-βήμα εγκατάσταση:

1. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image 5.2: Removing the fixing plate from the bidet seat.
2. Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
   

   Image 5.3: Securing the fixing plate to the toilet bowl.

3. Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
   

   Image 5.4: Attaching the bidet unit to the fixing plate.

4. Σύνδεση Παροχής Νερού: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
   

   Image 5.5: Connecting the bidet to the toilet's water supply.
5. Αποκατάσταση Νερού και Ρεύματος: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.

Initial Power-On and Water Spray Check:

When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes:

1. Unplug the bidet.
2. Κλείστε τη βαλβίδα νερού.
3. Περιμένετε 3-5 λεπτά.
4. Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.

Image 5.6: Important attention notice for initial power-on and LED light behavior.

6. Λειτουργία

The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:

Εικόνα 6.1: Λεπτομερής view of the side control panel, indicating various function buttons.

Λειτουργίες του πίνακα ελέγχου:

• Εξουσία: Ενεργοποιεί/απενεργοποιεί τη μονάδα.
• Να σταματήσει: Stops any active washing or drying function.
• Σπρέι: Initiates a general wash.
• Bidet: Initiates a feminine wash.
• Πλύσιμο Turbo: Provides a stronger, more focused wash.
• Ξήρανση: Ενεργοποιεί το στεγνωτήριο ζεστού αέρα.
• Αυτο: Starts an automatic washing and drying cycle with a single touch.
• Φως: Toggles the LED night light on/off.
• Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
• Nozzle Position (FR/BK): Adjusts the nozzle's forward or backward position.
• Θερμοκρασία νερού: Ρυθμίζει τη θερμοκρασία του νερού.
• Θερμοκρασία καθίσματος: Ρυθμίζει τη θερμοκρασία του θερμαινόμενου καθίσματος.
• Μνήμη: Saves current settings for personalized use.

Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.

7. Συντήρηση

Τακτικός καθαρισμός:

• Καθαρισμός ακροφυσίων: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
• Καθαρισμός μονάδας: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
• Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
• Εξωτερικός: Wipe down the exterior surfaces, including the control panel, with a soft, damp πανί.

Μακροχρόνια αποθήκευση:

If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.

8. Αντιμετώπιση Προβλημάτων

Αυτή η ενότητα αναφέρεται σε συνηθισμένα προβλήματα που ενδέχεται να αντιμετωπίσετε. Εάν το πρόβλημα επιμένει, επικοινωνήστε με την υποστήριξη πελατών.

9. Προδιαγραφές

10. Εγγύηση και υποστήριξη

Πληροφορίες εγγύησης: Please refer to the product packaging or the official XCQQ webιστότοπος για λεπτομερείς όρους και προϋποθέσεις εγγύησης. Κρατήστε την απόδειξη αγοράς για τυχόν αξιώσεις εγγύησης.

Υποστήριξη πελατών: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand webτοποθεσία.