Sygonix SY-5231014 Fingerprint/RFID Access System

1. Εισαγωγή

This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-5231014 Fingerprint/RFID Access System. This advanced access control unit features a vandal-proof metal housing, an illuminated keypad, and supports multiple access methods including fingerprint, RFID card, and PIN codes. It is designed for recessed installation and offers robust security with an IP55 rating, making it suitable for various indoor and outdoor applications. The system can manage up to 1000 users, including 10 designated visitors.

2. Οδηγίες ασφαλείας

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Ηλεκτρική ασφάλεια: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any wiring work.
• Τροφοδοτικό: Use only a compatible 12V/DC or 18V/DC power supply. Incorrect voltagμπορεί να προκαλέσει ζημιά στη μονάδα.
• Περιβαλλοντικές Συνθήκες: The unit has an IP55 rating, indicating protection against dust ingress and low-pressure water jets. Avoid direct exposure to heavy rain, submersion, or extreme temperatures.
• Vandalism Protection: While designed with a vandal-proof metal casing, extreme force can still cause damage.
• Συντήρηση: Μην επιχειρήσετε να επισκευάσετε μόνοι σας τη μονάδα. Αναθέστε όλες τις εργασίες σέρβις σε εξειδικευμένο προσωπικό.

3. Περιεχόμενα συσκευασίας

Αποσυσκευάστε προσεκτικά το κουτί και βεβαιωθείτε ότι όλα τα αντικείμενα που αναφέρονται παρακάτω υπάρχουν και δεν έχουν υποστεί ζημιά. Εάν λείπουν ή έχουν υποστεί ζημιά κάποια αντικείμενα, επικοινωνήστε αμέσως με τον πωλητή σας.

• Sygonix SY-5231014 Access System Unit
• Plastic Mounting Box (for recessed installation)
• Βίδες και βύσματα στερέωσης
• 30 cm Connection Cable for Access Control
• Δίοδος
• Hex Key (Allen wrench)
• Εγχειρίδιο χρήστη (αυτό το έγγραφο)

4. Ρύθμιση και εγκατάσταση

The Sygonix SY-5231014 is designed for recessed installation. Proper installation is crucial for optimal performance and security.

4.1 Τοποθέτηση της μονάδας

1. Ετοιμάστε το άνοιγμα: Create an appropriate opening in the wall or mounting surface to accommodate the plastic mounting box. Ensure sufficient depth for the unit and wiring.
2. Εγκατάσταση κουτιού τοποθέτησης: Secure the plastic mounting box into the prepared opening using the provided screws and plugs. Ensure it is flush with the surface.
3. Συνδέστε την καλωδίωση: Refer to the wiring diagram (not provided in this text, refer to the full product manual for detailed diagrams) for connecting the power supply (12V/DC or 18V/DC), electric lock, and Wiegand interface if applicable. The included 30 cm cable facilitates these connections. Ensure all connections are secure and insulated.
4. Insert Diode: If connecting to an inductive load (e.g., an electric strike), install the provided diode across the lock terminals to protect the access controller from back-EMF.
5. Secure Main Unit: Carefully insert the main access control unit into the mounting box. Secure it using the provided screws, typically located on the front panel.

5. Οδηγίες λειτουργίας

The Sygonix SY-5231014 offers various methods for granting access and managing users.

5.1 Διαχείριση χρηστών

The system supports up to 1000 users, comprising 990 general users and 10 visitor users. User access can be granted via PIN, RFID card, or fingerprint.

• Προσθήκη χρηστών: Access the programming mode (refer to the full manual for specific programming codes and sequences). Select the option to add a new user. Follow the prompts to register a PIN, scan an RFID card, or enroll a fingerprint.
• Διαγραφή χρηστών: In programming mode, select the option to delete a user. You may need to enter the user's ID or present their access credential to remove them from the system.
• Visitor Users: Visitor users typically have time-limited or single-use access. Configure these settings within the programming mode.

5.2 Πρόσβαση στο σύστημα

• Πρόσβαση με PIN: Enter your registered PIN code on the illuminated keypad, then press the '#' key.
• Πρόσβαση σε κάρτα RFID: Present your registered RFID card to the designated reader area on the unit.
• Πρόσβαση με δακτυλικά αποτυπώματα: Place your registered finger firmly on the fingerprint sensor.

Upon successful authentication, the relay will activate according to its configured mode (impulse or toggle), granting access.

5.3 Keypad Illumination

The keypad features illumination for improved visibility in low-light conditions. This feature is automatically active or can be configured within the system settings.

5.4 Relay Modes

The programmable relay can operate in either impulse or toggle mode:

• Λειτουργία ώθησης: The relay activates for a short, configurable duration (e.g., 1-99 seconds) after successful authentication, typically used for electric strikes or momentary lock releases.
• Λειτουργία εναλλαγής: The relay changes its state (ON to OFF, or OFF to ON) with each successful authentication, suitable for applications requiring a persistent state change, such as holding a door open until another authentication.

6. Συντήρηση

Regular maintenance ensures the longevity and reliable operation of your access system.

• Καθάρισμα: Χρησιμοποιήστε ένα μαλακό, δamp cloth to clean the keypad and fingerprint sensor. Avoid abrasive cleaners, solvents, or excessive moisture. Ensure the fingerprint sensor is free of dirt and smudges for accurate readings.
• Επιθεώρηση: Periodically check the unit for any signs of physical damage, loose connections, or wear.
• Ενημερώσεις λογισμικού: Ελέγξτε τον κατασκευαστή webιστότοπος για τυχόν διαθέσιμες ενημερώσεις υλικολογισμικού που ενδέχεται να βελτιώσουν την απόδοση ή να προσθέσουν λειτουργίες.

7. Αντιμετώπιση Προβλημάτων

If you encounter issues with your Sygonix SY-5231014, refer to the following common problems and solutions.

• Η μονάδα δεν ενεργοποιείται:
  Πιθανή αιτία: Δεν υπάρχει τροφοδοσία ρεύματος ή η καλωδίωση είναι λανθασμένη.
  Διάλυμα: Verify the power supply is connected and providing the correct voltage (12V/DC or 18V/DC). Check all wiring connections for continuity and proper polarity.
• Access Denied (PIN/Card/Fingerprint):
  Πιθανή αιτία: Incorrect PIN, unregistered card/fingerprint, or sensor obstruction.
  Διάλυμα: Ensure the correct PIN is entered. Verify the RFID card or fingerprint is registered in the system. Clean the fingerprint sensor thoroughly. Re-enroll fingerprint if issues persist.
• Το πληκτρολόγιο δεν ανταποκρίνεται:
  Πιθανή αιτία: System freeze or internal fault.
  Διάλυμα: Disconnect power to the unit for 30 seconds, then reconnect to perform a soft reset. If the issue persists, contact technical support.
• Η πόρτα δεν ξεκλειδώνει:
  Πιθανή αιτία: Lock malfunction, incorrect relay settings, or wiring issue.
  Διάλυμα: Check the electric lock for proper function. Verify the relay mode (impulse/toggle) and duration settings. Inspect wiring between the access unit and the lock.
• Ο φωτισμός δεν λειτουργεί:
  Πιθανή αιτία: Feature disabled or internal fault.
  Διάλυμα: Check system settings to ensure keypad illumination is enabled. If enabled and still not working, contact technical support.

8. Προδιαγραφές

9. Εγγύηση και υποστήριξη

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Sygonix webτοποθεσία. Κρατήστε την απόδειξη αγοράς για τυχόν αξιώσεις εγγύησης.