Signify PTF150-NW-G1-Y-FL-8-BZ

Philips LED Slim Flood Light PTF150-NW-G1-Y-FL-8-BZ User Manual

Model: PTF150-NW-G1-Y-FL-8-BZ

1. Εισαγωγή

This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.

The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.

2. Πληροφορίες Ασφάλειας

WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.

  • Αποσυνδέστε την παροχή ρεύματος από τον ασφαλειοδιακόπτη ή το κιβώτιο ασφαλειών πριν από την εγκατάσταση ή τη συντήρηση.
  • Βεβαιωθείτε ότι η παροχή voltagΤο e είναι συμβατό με τις απαιτήσεις του φωτιστικού (120V AC).
  • Do not operate the fixture with damaged wiring or components.
  • Αποφύγετε την άμεση έκθεση των ματιών στην πηγή φωτός όταν φωτίζεται.
  • The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
  • Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
  • Μην τροποποιείτε το εξάρτημα. Οποιεσδήποτε τροποποιήσεις ενδέχεται να ακυρώσουν την εγγύηση και να δημιουργήσουν κινδύνους για την ασφάλεια.

3. Περιεχόμενα συσκευασίας

Βεβαιωθείτε ότι όλα τα εξαρτήματα είναι παρόντα πριν ξεκινήσετε την εγκατάσταση:

  • Philips LED Slim Flood Light (1 unit)
  • Integrated Yoke Mount (pre-attached)
  • Power Cord (3-foot, STW 16 gauge)
  • IP66 Liquid Tight Connector (pre-attached to cord exit)
Philips LED Slim Flood Light with yoke mount

Εικόνα 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.

4. Προδιαγραφές

ΠροσδιορισμόςΛεπτομέρεια
Αριθμός μοντέλουPTF150-NW-G1-Y-FL-8-BZ
ΜάρκαSignify (Philips)
Wattage150 Watt
Έξοδος Lumen18600 Lumens
Θερμοκρασία χρώματος4000K Ψυχρό Λευκό
Αποδοτικότητα124 lumens ανά watt
Τομtage120 Volt (AC)
Τύπος τοποθέτησηςYoke Mount (Surface Mount)
ΦινίρισμαΜπρούντζος
ΥλικόDie-cast aluminum housing, tempered glass lens
Βαθμολογία προστασίας εισόδου (IP).IP65 (fixture), IP66 (connector)
Βάρος αντικειμένου4 λίρες
Διαστάσεις (Περίπου)16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D)

5. Ρύθμιση και εγκατάσταση

The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:

  1. Παρασκευή: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
  2. Θέση τοποθέτησης: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
  3. Σήμανση και διάτρηση: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
  4. Ασφαλίστε το εξάρτημα: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
  5. Ηλεκτρική σύνδεση:
    • The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
    • Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
    • Ensure all wire connections are properly insulated and protected from moisture.
  6. Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
  7. Επαναφορά ισχύος: Μόλις ολοκληρωθεί η εγκατάσταση και όλες οι συνδέσεις είναι ασφαλείς, αποκαταστήστε την τροφοδοσία ρεύματος στον ασφαλειοδιακόπτη.
Philips LED Slim Flood Light dimensions diagram

Εικόνα 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.

6. Οδηγίες λειτουργίας

The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.

  • Ενεργοποίηση/Απενεργοποίηση: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
  • Αυτόματη λειτουργία: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.

7. Συντήρηση

The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

  • Καθάρισμα: Καθαρίζετε περιοδικά τον φακό και το περίβλημα με ένα μαλακό,amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
  • Επιθεώρηση: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
  • Αντικατάσταση εξαρτημάτων: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.

8. Αντιμετώπιση Προβλημάτων

If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:

ΠρόβλημαΠιθανή αιτίαΔιάλυμα
Το φως δεν ανάβει.Καμία ισχύ στο εξάρτημα.
Χαλαρή σύνδεση καλωδίωσης.
Faulty circuit breaker/fuse.
Ελέγξτε την παροχή ρεύματος.
Verify all wiring connections are secure (consult a qualified electrician).
Επαναφέρετε τον διακόπτη κυκλώματος ή αντικαταστήστε την ασφάλεια.
Το φως τρεμοπαίζει ή είναι αμυδρό.Ασυνεπής τροφοδοσία ρεύματος.
Χαλαρή καλωδίωση.
Ζημιά στο εξάρτημα.
Εξασφαλίστε σταθερή ισχύ.
Ελέγξτε τις συνδέσεις καλωδίωσης.
If damage is suspected, discontinue use and contact support.
Νερό μέσα στο εξάρτημα.Improperly sealed connections.
Damaged housing/lens.
Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support.

Εάν τα βήματα αντιμετώπισης προβλημάτων δεν επιλύσουν το πρόβλημα, επικοινωνήστε με την υποστήριξη πελατών.

9. Εγγύηση και υποστήριξη

For warranty information and technical support, please refer to the official Signify (Philips) webιστότοπο ή επικοινωνήστε με το τμήμα εξυπηρέτησης πελατών. Κρατήστε την απόδειξη αγοράς σας ως απόδειξη αγοράς.

Κατασκευαστής: Δηλώ

Αριθμός μοντέλου: PTF150-NW-G1-Y-FL-8-BZ

Στοιχεία επικοινωνίας: Please visit the official Signify webιστότοπος για τα πιο ενημερωμένα στοιχεία επικοινωνίας και πόρους υποστήριξης.

Σχετικά Έγγραφα - PTF150-NW-G1-Y-FL-8-BZ

Προview Interact Pro: Εύκολο, Αποτελεσματικό, Έξυπνο Σύστημα Φωτισμού για Επιχειρήσεις
Ανακαλύψτε το Interact Pro, το ασύρματο έξυπνο σύστημα φωτισμού της Signify, που προσφέρει ενεργειακή απόδοση, άνεση και προηγμένες λειτουργίες για γραφεία, βιομηχανίες και σχολεία. Μάθετε για τη ρύθμιση του συστήματος, τα οφέλη, το υλικό και τις εφαρμογές.
Προview Signify MultiOne Mobile User Manual v1.7: Driver Configuration and NFC Scanner Guide
Comprehensive user manual for the Signify MultiOne Mobile app. Learn to configure Philips and Advance lighting drivers using NFC and Bluetooth, manage features like ALO, AOC, DynaDimmer, and DALI, and utilize the external NFC scanner for efficient driver management and cloning.
Προview Philips Signify Luminaire Dismantling Recommendation for End-of-Life Disposal
Detailed guide from Signify on how to dismantle Philips luminaires for proper end-of-life disposal, covering component breakdown, material recycling, and disposal recommendations. Includes a parts list and step-by-step dismantling process.
Προview LS & SCG Dismantling Instructions (After End of Life) for EM259C WL/CM Exit Sign
Provides detailed dismantling instructions for the LS & SCG EM259C WL/CM Exit Sign M3 ELW WH after its end of life, including safety precautions, step-by-step procedures, a component list, and environmental disposal guidelines.
Προview Philips PV Vertical Panel 200Wp Installation Guide | Signify
This guide provides detailed instructions for the installation of the Philips PV Vertical Panel 200Wp by Signify. Learn about mounting, connections, dimensions, and safety precautions for a secure and efficient setup.
Προview Signify MC Gateway Technical Specifications and Installation Guide
Detailed technical specifications, system description, installation instructions, and safety information for the Signify MC Gateway, a device for MasterConnect lighting systems.