Λεγκράν LEG67766

Legrand Micromodule for Connected VMC with Netatmo

Μοντέλο: LEG67766

1. Εισαγωγή

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Legrand Micromodule for Connected VMC (Ventilation Mécanique Contrôlée) with Netatmo. This micromodule is designed to enable smart control of a single-flow, 2-speed VMC system, with a maximum power rating of 250W. It integrates seamlessly with the Home+Control application and wireless control devices, offering enhanced convenience and energy management for your ventilation system.

Διαβάστε προσεκτικά αυτό το εγχειρίδιο πριν από την εγκατάσταση και τη χρήση και φυλάξτε το για μελλοντική αναφορά.

2. Πληροφορίες Ασφάλειας

ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Κίνδυνος ηλεκτροπληξίας

  • Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
  • Always disconnect power at the main circuit breaker before installing, servicing, or removing the device.
  • Do not install or use this device if it appears damaged.
  • Βεβαιωθείτε ότι όλες οι συνδέσεις είναι ασφαλείς και σωστά μονωμένες.
  • Αυτή η συσκευή προορίζεται μόνο για χρήση σε εσωτερικούς χώρους. Μην την εκθέτετε σε υγρασία ή ακραίες θερμοκρασίες.

3. Περιεχόμενα συσκευασίας

Βεβαιωθείτε ότι το πακέτο σας περιέχει τα ακόλουθα στοιχεία:

  • Legrand Micromodule for Connected VMC
  • White cover (if applicable)
  • Εγχειρίδιο οδηγιών (αυτό το έγγραφο)

4. Ρύθμιση και εγκατάσταση

The Legrand Micromodule is designed to be installed as close as possible to the VMC unit it controls. Professional installation is highly recommended due to the electrical nature of the device.

4.1 Προεγκατάσταση

  1. Αποσυνδέστε το ρεύμα: Turn off the main power supply to the VMC circuit at your electrical panel. Verify that the power is off using a voltagε δοκιμαστής.
  2. Προσδιορίστε την καλωδίωση: Identify the power supply wires and the control wires for your 2-speed VMC system. Consult your VMC's manual if necessary.

4.2 Wiring the Micromodule

Follow the wiring diagram provided with the product packaging. Typically, the micromodule will connect to the main power supply and then to the VMC's speed control inputs (e.g., low speed and high speed). Ensure proper grounding.

Legrand Micromodule for Connected VMC with Netatmo, showing its compact design and wiring terminals.

Image 1: Legrand Micromodule for Connected VMC. This image displays the compact design of the micromodule, highlighting its size and the terminals for electrical connections. It is typically installed within an electrical box or near the VMC unit.

4.3 Pairing with Home+Control App

  1. Επαναφορά ισχύος: Once wiring is complete and secure, restore power to the circuit.
  2. Λήψη εφαρμογής: Download the Legrand Home+Control application from your device's app store.
  3. Δημιουργία λογαριασμού: Ανοίξτε την εφαρμογή και δημιουργήστε έναν λογαριασμό ή συνδεθείτε.
  4. Προσθήκη συσκευής: Follow the in-app instructions to add a new device. The app will guide you through the pairing process, which typically involves putting the micromodule into pairing mode (refer to the specific instructions in the app or product leaflet for exact steps, often involving a short press on a button on the module or a specific power cycle sequence).
  5. Διαμορφώστε: Once paired, you can configure the VMC speeds and integrate with other Netatmo-compatible devices.

5. Operating the Micromodule

The Legrand Micromodule allows for smart control of your 2-speed VMC system.

5.1 Via Home+Control App

  • Open the Home+Control app on your smartphone or tablet.
  • Navigate to the VMC device.
  • You will typically find options to switch between the two VMC speeds (e.g., 'Low' and 'High' or 'Normal' and 'Boost').
  • The app may also allow for scheduling, automation, and integration with other smart home scenarios.

5.2 Via Wireless Control (Optional)

If you have paired the micromodule with a compatible Legrand wireless control switch, you can operate the VMC speeds directly from the switch. Refer to the instructions provided with your wireless control for specific operation details.

6. Συντήρηση

The Legrand Micromodule is designed for long-term, maintenance-free operation. However, consider the following:

  • Καθάρισμα: If the exterior of the module or its cover requires cleaning, ensure power is disconnected. Use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Ενημερώσεις υλικολογισμικού: Periodically check the Home+Control app for available firmware updates for your micromodule. Updates can improve performance and add new features.
  • VMC Maintenance: Regular maintenance of your VMC system (e.g., filter cleaning/replacement) should be performed according to the VMC manufacturer's instructions.

7. Αντιμετώπιση Προβλημάτων

If you encounter issues with your Legrand Micromodule, try the following steps:

  • Δεν υπάρχει τροφοδοσία ρεύματος/Δεν υπάρχει απόκριση:
    • Check the circuit breaker to ensure power is supplied to the VMC circuit.
    • Βεβαιωθείτε ότι όλες οι συνδέσεις καλωδίωσης είναι ασφαλείς (only if you are a qualified electrician).
  • Δεν είναι δυνατή η σύζευξη με την εφαρμογή:
    • Ensure your smartphone is connected to the same Wi-Fi network as your Netatmo gateway (if applicable).
    • Restart the Home+Control app.
    • Try resetting the micromodule to factory settings (refer to the app or product leaflet for specific instructions).
    • Ensure the micromodule is within range of your Netatmo gateway or Wi-Fi network.
  • VMC Not Changing Speeds:
    • Verify the VMC itself is functioning correctly when directly controlled (if possible).
    • Check the wiring between the micromodule and the VMC's speed inputs.
    • Ensure the micromodule is correctly configured in the Home+Control app.

If problems persist, contact Legrand customer support or consult a qualified electrician.

8. Προδιαγραφές

ΚατασκευαστήςLegrand
Αριθμός μοντέλουLEG67766
Αριθμός ανταλλακτικούLEG67766
Διαστάσεις προϊόντος2.72 x 3.7 x 3.7 ίντσες
Βάρος αντικειμένου2.65 ουγγιές
Μέγιστη βαθμολογία ισχύος250W
VMC TypeSingle flow, 2-speed
ΑρμονίαHome+Control app, Netatmo ecosystem
Απαιτούνται μπαταρίεςΟχι

9. Εγγύηση και υποστήριξη

Legrand products are designed and manufactured to the highest quality standards. For information regarding the warranty period and terms for your Micromodule, please refer to the warranty card included with your product or visit the official Legrand webτοποθεσία.

For technical support, troubleshooting assistance, or to report a defective product, please contact Legrand customer service through their official webιστότοπο ή τα στοιχεία επικοινωνίας που παρέχονται στην τεκμηρίωση του προϊόντος σας.

Επίσημο Legrand Webτοποθεσία: www.legrand.com

Σχετικά Έγγραφα - LEG67766

Προview Οδηγός εγκατάστασης μικρομονάδας φωτισμού Legrand Connected 5742 43
Οδηγός εγκατάστασης και χρήσης για τη μικρομονάδα φωτισμού Legrand Arteor με συνδεδεμένη Netatmo (μοντέλο 5742 43), συμπεριλαμβανομένων τεχνικών προδιαγραφών, διαγραμμάτων καλωδίωσης και οδηγιών ασφαλείας.
Προview Arteor με Netatmo: Οδηγός προϊόντων συστήματος έξυπνου σπιτιού | Legrand
Εξερευνήστε το Arteor με το σύστημα έξυπνου σπιτιού Netatmo της Legrand. Ανακαλύψτε λύσεις συνδεδεμένου φωτισμού, στόρια, πρίζες και φωνητικού ελέγχου για τη σύγχρονη ζωή, σχεδιασμένες για ευκολία χρήσης και κομψή αισθητική.
Προview Οδηγός εγκατάστασης και χρήσης της σύνδεσης Legrand 412170
Λεπτομέρειες οδηγού για την εγκατάσταση και τη χρήση της σύνδεσης με τηλεχειρισμό Legrand 412170, συμπεριλαμβανομένης της καλωδίωσης, της διαμόρφωσης, των τεχνικών προδιαγραφών και των προδιαγραφών ασφαλείας.
Προview Οδηγός εγκατάστασης συνδεδεμένης ξηρής επαφής Legrand 4 121 73
Πλήρης οδηγός εγκατάστασης και χρήσης για τη μονάδα Legrand 4 121 73 Connected Dry Contact, με λεπτομέρειες για τα χαρακτηριστικά της, τις απαιτήσεις καλωδίωσης, τα μέτρα ασφαλείας και την ενσωμάτωσή της με το οικοσύστημα έξυπνου σπιτιού Legrand Home + Control.
Προview Legrand 2 Gang Connected Switch with Neutral CB0416 - CN0416 - CT0416 Installation Guide
Installation instructions and technical specifications for the Legrand 2 Gang Connected Switch with Neutral (CB0416, CN0416, CT0416), a smart home accessory compatible with Netatmo.
Προview Οδηγός εγκατάστασης και χρήσης του ρελέ Legrand Connected
Πλήρης οδηγός για την εγκατάσταση και χρήση του συνδεδεμένου ρελέ Legrand (4 121 71 - 1 991 22) με Netatmo, που καλύπτει την καλωδίωση, την εγκατάσταση και τη λειτουργία.