1. Εισαγωγή
This instruction manual provides essential information for the safe and effective use of your DALY LiFePo4 72V 40A 24S Smart Battery Management System (BMS). This BMS is designed to protect and optimize the performance of 24-series LiFePo4 battery packs, commonly used in energy storage, electric vehicles, electric tools, and solar systems. Please read this manual thoroughly before installation and operation.
2. Πληροφορίες Ασφάλειας
Εργασία με high-voltage battery systems requires extreme caution. Failure to follow safety instructions can result in serious injury, property damage, or death. Always adhere to the following safety guidelines:
- Βεβαιωθείτε ότι όλες οι πηγές τροφοδοσίας είναι αποσυνδεδεμένες πριν από την εγκατάσταση ή τη συντήρηση.
- Να φοράτε κατάλληλο ατομικό προστατευτικό εξοπλισμό (ΜΑΠ), συμπεριλαμβανομένων μονωτικών γαντιών και προστασίας ματιών.
- Verify correct wiring polarity before connecting the BMS to the battery pack. Incorrect wiring can damage the BMS and battery.
- Μην βραχυκυκλώνετε τους ακροδέκτες της μπαταρίας ή τις συνδέσεις του BMS.
- Κρατήστε το BMS μακριά από νερό, υγρασία και εύφλεκτα υλικά.
- Μόνο εξειδικευμένο προσωπικό πρέπει να εκτελεί την εγκατάσταση και τη συντήρηση.
- Do not attempt to open or repair the BMS unit. Contact support for assistance.
3. Περιεχόμενα συσκευασίας
Βεβαιωθείτε ότι όλα τα στοιχεία υπάρχουν στη συσκευασία:
- DALY LiFePo4 72V 40A 24S Smart BMS (1 unit)
- Bluetooth Module (1 unit)
- NTC Temperature Sensor (1 unit)
- Sampling Cable (Balance Wires) (1 set)
- UART Communication Cable (1 unit)
- Εγχειρίδιο οδηγιών (1 μονάδα)
Εικόνα 3.1: Πρample of package contents for the DALY Smart BMS.
4. Το προϊόν τελείωσεview
The DALY Smart BMS provides comprehensive protection for your LiFePo4 battery pack, including overcurrent, overcharge, overdischarge, short circuit, and temperature protection. It features a robust design with injection patent technology and a patent shell for waterproof, dustproof, shockproof, and anti-static properties.
Εικόνα 4.1: Κορυφή view of the DALY Smart BMS, highlighting main connections and communication interfaces.
Figure 4.2: Dimensions and continuous discharge current rating of the DALY Smart BMS.
5. Ρύθμιση και εγκατάσταση
Careful installation is crucial for the proper functioning of the BMS. Follow these steps precisely:
- Προετοιμασία της μπαταρίας: Ensure your LiFePo4 battery pack consists of 24 cells in series, with each cell rated at 3.2V.
- Συνδέστε τα καλώδια ισορροπίας:
- Before connecting the balance wires to the BMS, ensure all balance wires are correctly welded to their respective battery cell terminals.
- Connect the balance wire harness to the BMS balance port. Ensure the B- wire (total negative pole) is connected first, followed by B1, B2, and so on, up to B24 (total positive pole).
- Επαληθεύστε τον τόμtage κάθε κελιού και ο συνολικός τόμοςtage using a multimeter before proceeding.
- Connect Main Power Wires:
- Connect the main negative wire from the battery pack to the B- terminal on the BMS.
- Connect the main negative wire for the load/charger to the P- terminal on the BMS.
- Σύνδεση αισθητήρα θερμοκρασίας NTC: Plug the NTC sensor into the designated port on the BMS. Position the sensor appropriately on the battery pack to monitor temperature.
- Connect Communication Modules (Optional):
- For Bluetooth connectivity, plug the Bluetooth module into the UART port.
- For PC communication, connect the UART cable to the UART port and then to a USB-UART converter (if needed) to your computer.
- Ενεργοποιήστε το BMS: After all connections are secure, activate the BMS by pressing the activation button on the power board or by connecting the charger to the battery pack.
Figure 5.1: Wiring diagram for the DALY Smart BMS. Ensure all connections are made correctly.
For visual guidance on wiring and connections, refer to the official DALY website tutorial videos: DALY BMS Tutorial Videos.
6. Οδηγίες λειτουργίας
The DALY Smart BMS allows monitoring and parameter modification via Bluetooth app or PC software.
6.1. Bluetooth App Operation
Connect the Bluetooth module to the BMS UART port. Download the DALY BMS app from your smartphone's app store. Open the app, search for your BMS, and connect. The initial password for the app is 123456. Through the app, you can:
- Monitor real-time battery status (voltage, ρεύμα, θερμοκρασία).
- View όγκος μεμονωμένου κυττάρουtages for balancing.
- Adjust protection parameters (e.g., overcharge/overdischarge voltage, overcurrent limits).
- Check fault alarms and historical data.
Figure 6.1: Monitoring the BMS via the Bluetooth smartphone application.
6.2. Λειτουργία λογισμικού Η/Υ
Connect the BMS to your computer using the UART cable and a USB-UART converter. Install the DALY BMS PC software. The PC software offers more detailed control and data logging capabilities, allowing for advanced parameter configuration and firmware updates.
Figure 6.2: Interacting with the BMS using PC software via UART connection.
Σπουδαίος: The factory default parameters are general. It is essential to review and adjust these parameters to match the specific capacity (Ah) of your battery pack. Incorrect parameter settings can lead to inaccurate state-of-charge readings and potentially damage the battery. The percentage of remaining power will be inaccurate if the capacity is not set correctly.
7. Συντήρηση
To ensure the longevity and optimal performance of your DALY Smart BMS:
- Regularly inspect all wiring for signs of wear, corrosion, or loose connections.
- Διατηρείτε το BMS καθαρό και απαλλαγμένο από σκόνη και υπολείμματα.
- Βεβαιωθείτε ότι υπάρχει επαρκής αερισμός γύρω από το BMS για να αποτρέψετε την υπερθέρμανση.
- Periodically check battery cell voltages through the app or software to confirm proper balancing.
- Avoid exposing the BMS to extreme temperatures or harsh environmental conditions beyond its operating specifications.
8. Αντιμετώπιση Προβλημάτων
If you encounter issues with your DALY Smart BMS, consider the following common troubleshooting steps:
| Πρόβλημα | Πιθανή αιτία | Διάλυμα |
|---|---|---|
| BMS not activating/no power output | Incorrect wiring; BMS not activated; low battery voltage. | Verify all wiring connections (B-, P-, balance wires). Press the activation button or connect the charger to activate. Check battery voltage; if too low, charge the battery. |
| Προβλήματα σύνδεσης Bluetooth | Bluetooth module not properly connected; app issues; interference. | Ensure the Bluetooth module is securely plugged into the UART port. Restart the app and try reconnecting. Check for other Bluetooth devices causing interference. Ensure the app is updated. |
| Inaccurate State of Charge (SOC) | Battery capacity parameter not set correctly in the app/software. | Access the app or PC software and set the battery pack's actual Ah capacity. |
| Overcharge/Overdischarge protection tripping prematurely | Protection parameters set too low/high; faulty cell. | Review and adjust overcharge/overdischarge voltage parameters in the app/software to match your battery specifications. Check individual cell voltages for imbalances. |
If the problem persists after attempting these steps, please contact DALY customer support for further assistance.
9. Προδιαγραφές
| Χαρακτηριστικό | Προσδιορισμός |
|---|---|
| Αριθμός μοντέλου | LFP24S |
| Σύνθεση κυψέλης μπαταρίας | LiFePo4 (Lithium Iron Phosphate) |
| Διαμόρφωση σειράς | 24S (24 κελιά σε σειρά) |
| Nominal Voltage | 72V (for 3.2V rated cells) |
| Συνεχές ρεύμα εκφόρτισης | 40A |
| Διεπαφή επικοινωνίας | UART (Bluetooth module included) |
| Διαστάσεις προϊόντος (Μ x Π x Υ) | 5.03 x 2.6 x 0.51 ίντσες (128 x 66 x 18 mm) |
| Βάρος αντικειμένου | 13.4 ουγγιές |
| Κατασκευαστής | Dongguan Daly Electronics Co., Ltd |
10. Εγγύηση και υποστήριξη
DALY Electronics is committed to providing high-quality products and customer satisfaction. This product comes with lifetime technical support.
- Τεχνική Υποστήριξη: For any technical inquiries, installation assistance, or troubleshooting not covered in this manual, please contact DALY customer service. We offer 24-hour one-on-one customer service.
- Στοιχεία επικοινωνίας: Refer to the official DALY webιστότοπο ή στην τεκμηρίωση αγοράς σας για τα πιο πρόσφατα στοιχεία επικοινωνίας.
