TOPENS KD702

TOPENS KD702 Automatic Light-Duty Dual Swing Gate Opener

Εγχειρίδιο οδηγιών

1. Πληροφορίες Ασφάλειας

Read all instructions carefully before installation and use. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

  • Ανίχνευση παρεμπόδισης: The system is equipped with integrated stop and reverse functions in case of obstruction. Ensure the path of the gate is clear before operation.
  • Photocell Beam System: An infrared photocell beam system is included for enhanced safety. Install and align it correctly to prevent the gate from closing on obstacles.
  • Φως που αναβοσβήνει: A flashing light is provided to indicate gate movement, increasing awareness for pedestrians and vehicles.
  • Μη αυτόματη έκδοση: In case of power failure or remote control loss, use the manual release key to operate the gate manually. Keep the key accessible but secure.
  • Παιδιά και κατοικίδια: Keep children and pets away from the gate area during operation. Do not allow children to play with the gate controls.
  • Επαγγελματική εγκατάσταση: While designed for DIY installation, if you are unsure about any steps, consult a qualified professional.

2. Το προϊόν τελείωσεview

The TOPENS KD702 is an automatic light-duty dual swing gate opener designed for residential and light commercial applications. It features two 24V DC motors and is suitable for gates up to 3.6 meters (12 feet) long or 140 kg (300 lbs) per gate leaf. The system offers reliable performance with advanced safety features and flexible power options.

Βασικά Χαρακτηριστικά:

  • Ανθεκτική κατασκευή: Extendable aluminum swing arms ensure superior performance and longevity.
  • Ευέλικτη εγκατάσταση: Supports both pull-to-open (inward swing) and push-to-open (outward swing) configurations.
  • Πολλαπλές λειτουργίες ισχύος: Operates directly on 230V AC. Can be supplemented with a 24V backup battery and/or solar panel (not included) for enhanced reliability.
  • Προηγμένη ασφάλεια: Features electromagnetism limit switches, soft start/soft stop, obstruction detection with auto-reverse, infrared photocell beam, and a flashing warning light.
  • Ρυθμιζόμενες ρυθμίσεις: Customizable auto-close time (0-99s) and holding force.
  • Ευρεία συμβατότητα: Works with various gate materials including steel, wood, vinyl, panel, tube, and chain link.
Diagram illustrating TOPENS KD702 features including self-closing, soft start/stop, obstacle adjusting, security code, and gate swing options.
This diagram highlights the key features of the TOPENS KD702, such as self-closing settings, soft start and stop functionality, obstacle adjustment, advanced security coding, and the two available gate swing installation modes (pull-to-open and push-to-open).
Εσωτερικός view of the TOPENS KD702 motor with callouts for key components like the electromagnetism limit switch, smart chip, manual release key, extension cable, and features like waterproof design, operating temperature, and quiet operation.
Ένα εσωτερικό view of the KD702 motor, detailing its robust components. It shows the reliable electromagnetism limit switch for easy adjustment, a smart chip for ultimate safety protection, and a manual release key for power outages. The image also points out the 7.5m extension 5 conductor cable for easy actuator arm connection, and highlights features like waterproof design, a wide working temperature range (-20°C to +50°C), and quiet operation (less than 50dB).

3. Περιεχόμενα συσκευασίας

The TOPENS KD702 kit includes all necessary components for installation and operation. Please check the package carefully upon receipt to ensure all items are present.

  • 2 x Gate Opener Actuators (Motors)
  • 1 x Κουτί ελέγχου
  • 2 x Remote Controls (M12)
  • 1 x Infrared Photocell Beam System (TC102)
  • 1 x Flashing Warning Light (JD24VY)
  • Mounting Hardware (brackets, bolts, screws, etc.)
  • Κλειδιά χειροκίνητης απελευθέρωσης
  • Εγχειρίδιο οδηγιών

4. Ρύθμιση και εγκατάσταση

The TOPENS KD702 is designed for straightforward installation. Follow these steps carefully. No welding is required, and common tools are sufficient.

4.1 Λίστα ελέγχου πριν από την εγκατάσταση:

  • Ensure your gate is in good working condition, swinging freely without binding.
  • Verify gate dimensions and weight are within the KD702's capacity (max 3.6m / 140kg per leaf).
  • Gather necessary tools (e.g., drill, wrenches, measuring tape, level).
  • Plan the wiring path for AC power and accessories.

4.2 Mounting the Actuators:

The KD702 supports two installation modes: pull-to-open (gate swings inwards) and push-to-open (gate swings outwards). Choose the appropriate mode for your gate.

Detailed installation diagram for TOPENS KD702 showing gate capacity, pull-to-open and push-to-open configurations, and wiring for power modes.
This comprehensive diagram illustrates the gate capacity for each arm of the KD702, along with detailed schematics for both pull-to-open (inward swing) and push-to-open (outward swing) installation modes. It also shows the wiring for Power Mode 1 (AC only) and Power Mode 2 (AC with backup batteries), and the connection points for various optional accessories like the photocell, warning light, and external receiver.

Refer to the detailed diagrams in the manual for precise mounting point measurements (A, B, C dimensions) to ensure optimal gate travel and performance. Securely attach the mounting brackets to the gate post and gate frame, then connect the actuators.

4.3 Wiring the Control Box:

Connect the actuator motors, AC power, and safety accessories (photocell, flashing light) to the control board inside the control box. Ensure all connections are secure and follow the wiring diagram provided in the full manual.

Diagram showing three supported power modes for the TOPENS KD702: AC electricity only, AC with backup batteries, and AC with solar panels and backup batteries.
This diagram illustrates the three supported power modes for the KD702: Power Mode 1 uses AC electricity only; Power Mode 2 uses AC electricity with two 12V automobile backup batteries (not included); and Power Mode 3 uses AC electricity, solar panels, and backup batteries (solar panel and charge controller not included).

4.4 Limit Switch Adjustment:

Adjust the electromagnetism limit switches on each actuator to define the open and closed positions of your gate. This is crucial for proper operation and preventing over-travel.

4.5 Προαιρετικά αξεσουάρ:

The KD702 is compatible with a range of TOPENS accessories to enhance functionality and convenience, such as wireless keypads (TKP3), external receivers (ERM12), and vehicle sensors (TEW3).

Grid of compatible TOPENS accessories including remote controls, keypads, sensors, and warning lights.
A selection of compatible TOPENS accessories available for the KD702, including various remote controls (M12), wireless and wired keypads (TC188, TC175P, TKP3), external receivers (ERM12), push buttons (TC148), vehicle sensors (TEW3), electric gate locks (ET24), reflection photocell sensors (TRF3), and warning lights (JD24VY).

5. Οδηγίες λειτουργίας

Once installed and configured, operating your TOPENS KD702 gate opener is simple.

5.1 Λειτουργία τηλεχειριστηρίου:

Press the designated button on your M12 remote control to open or close the gate. A single press will initiate the gate movement. If the gate is already moving, a press will stop it. Another press will reverse its direction.

Person in a car using a remote control to open a dual swing gate, with text 'ENJOY YOUR SWING GATE OPENER'.
This image shows a user conveniently opening their swing gate with a remote control from inside their vehicle. The gate opener is designed for light-duty swing gates and is solar capable (solar panel not included).

5.2 Automatic Closing Function:

The KD702 features an adjustable auto-close timer (0-99 seconds). After the gate fully opens, it will automatically close after the set delay. This feature can be enabled or disabled and adjusted via the control board settings.

5.3 Soft Start and Soft Stop:

The gate opener is designed with soft start and soft stop functionality, ensuring smooth and quiet operation, which extends the lifespan of the motor and gate hardware.

5.4 Manual Release:

Σε περίπτωση εξουσίας ουtage or if the remote control is lost, insert the manual release key into the actuator's lock cylinder and turn it to disengage the motor. This allows you to open or close the gate by hand.

6. Συντήρηση

The TOPENS KD702 is designed for minimal maintenance. Regular checks will ensure optimal performance and longevity.

  • Μηνιαίος: Inspect the gate and hinges for any signs of wear or damage. Ensure the gate moves freely without obstruction when manually operated.
  • Τριμηνιαίος: Check all mounting hardware for tightness. Verify that the photocell beams are clean and properly aligned. Test the obstruction detection feature by placing a soft object in the gate's path.
  • Ετησίως: Lubricate any moving parts of the gate (hinges, pivots) as recommended by your gate manufacturer. Inspect wiring for any signs of damage or fraying.
  • Έλεγχος μπαταρίας (εάν υπάρχει): If using backup batteries, check their charge level and condition periodically.

7. Αντιμετώπιση Προβλημάτων

Refer to this section for common issues and their solutions. For more complex problems, contact TOPENS customer support.

ΠρόβλημαΠιθανή αιτίαΔιάλυμα
Η πύλη δεν ανταποκρίνεται στο τηλεχειριστήριο.Dead remote battery, remote not programmed, power issue to opener.Replace remote battery. Reprogram remote. Check power supply to control box.
Η πύλη ανοίγει αλλά δεν κλείνει.Photocell beam obstructed or misaligned, auto-close disabled.Clear obstruction from photocell path. Clean and realign photocells. Enable auto-close function in control board settings.
Η πύλη σταματά ή κάνει όπισθεν απροσδόκητα.Obstruction detected, limit switch misadjusted.Remove any obstructions. Check and readjust limit switches for open/closed positions.
Η πύλη λειτουργεί αργά ή με δυσκολία.Low power, gate hinges stiff, motor issue.Check power supply. Lubricate gate hinges. Contact support if motor issue is suspected.
Το φως που αναβοσβήνει δεν λειτουργεί.Loose connection, faulty bulb/LED.Check wiring connections to the control box. Replace flashing light if necessary.

8. Προδιαγραφές

ΠροσδιορισμόςΛεπτομέρεια
ΜοντέλοKD702
ΚατασκευαστήςHangzhou Sanyuan Tools Co.,Ltd
Max. Gate Length (per leaf)3.6 μέτρα (12 πόδια)
Max. Gate Weight (per leaf)140 κιλά (300 λίβρες)
Motor Voltage24V DC
Τροφοδοτικό230V AC (main), 24V Battery / Solar (optional backup)
Διαστάσεις προϊόντος (Μ x Π x Υ)85.5 x 8.4 x 10.4 εκ
Βάρος προϊόντος16.5 κιλά
Συμπεριλαμβανόμενες μπαταρίες6 CR2 (for remotes/accessories)
Σύνθεση μπαταρίαςΛίθιο μέταλλο
Θερμοκρασία λειτουργίας-20°C έως +50°C
Επίπεδο θορύβουΛιγότερο από 50dB

9. Εγγύηση και υποστήριξη

TOPENS is committed to providing excellent customer service and support for your KD702 gate opener.

  • Εγγύηση: The TOPENS KD702 comes with a 12-month warranty from the date of purchase.
  • Τεχνική Υποστήριξη: Enjoy lifetime technical support. For any installation or operational questions, please contact TOPENS customer service.
  • Επιστροφές και Ανταλλαγές: TOPENS offers a free 30-day product return and exchange service.
  • Επαφή: For comprehensive system solutions and support, visit the official TOPENS website to contact customer service.