Εισαγωγή
This manual provides essential information for the proper installation, operation, and maintenance of the Selec TC303A Digital Temperature Controller. Please read this manual thoroughly before using the device to ensure safe and efficient operation.
The Selec TC303A is a high-performance digital temperature controller featuring a single 3-digit, 7-segment LED display. It supports various thermocouple (TC) and RTD inputs, offering both PID and ON/OFF control modes. Key features include a relay ON status indicator, three front panel control buttons for easy operation, and selectable Celsius/Fahrenheit temperature units.
Προϊόν Πάνωview
Εικόνα: Μπροστά view of the Selec TC303A Digital Temperature Controller. The device features a black casing with an orange bezel. The front panel displays "Selec" and "TC303" in white text, with a red 3-digit LED display showing "303". Below the display are three orange control buttons: a square button on the left and two triangular buttons on the right.
The Selec TC303A is designed for precise temperature regulation in various industrial and scientific applications. Its compact design and user-friendly interface make it suitable for a wide range of control tasks.
Ρύθμιση και εγκατάσταση
Proper installation is crucial for the optimal performance and longevity of the TC303A controller. Ensure all power is disconnected before proceeding with installation.
Βάση
The controller is designed for panel mounting. Ensure adequate space for ventilation and access to wiring terminals. The protection level is IP66 for the front panel, indicating protection against dust and powerful water jets.
Καλωδίωση
Connect the power supply, sensor input, and control output according to the wiring diagram provided with the product packaging. The supply voltage range is 85 to 270V AC/DC (50/60Hz).
- Τροφοδοτικό: Connect to the specified AC/DC voltagε πηγή.
- Είσοδος αισθητήρα: Connect your chosen TC (J, K, T, R, S type) or RTD (Pt100) sensor to the designated terminals. Ensure correct polarity for thermocouples.
- Έξοδος ελέγχου: Connect the relay or SSR drive output to your heating/cooling element or other controlled device.
Refer to the detailed wiring diagram included with your product for specific terminal assignments.
Οδηγίες Λειτουργίας
The TC303A features a single display and three front panel buttons for configuration and operation.
Ενεργοποίηση
Once wired correctly, apply power. The display will illuminate, showing the current process value (PV).
Setting the Setpoint
- Πατήστε το ΣΕΙΡΑ button (typically the square button) to enter setpoint adjustment mode.
- Χρησιμοποιήστε το UP και ΚΑΤΩ buttons (triangular buttons) to adjust the desired temperature setpoint.
- Πατήστε το ΣΕΙΡΑ button again to confirm and save the setpoint.
Control Modes (PID / ON/OFF)
The controller supports both PID and ON/OFF control. The specific method for selecting or configuring these modes will be detailed in the full product manual. Generally, this involves accessing a parameter menu using a combination of button presses.
Temperature Unit Selection (C / F)
The unit of temperature (Celsius or Fahrenheit) can be selected. This setting is typically found within the configuration menu. Refer to the full manual for instructions on how to access and change this parameter.
Συντήρηση
The Selec TC303A is designed for reliable operation with minimal maintenance. Regular checks can help ensure continued performance.
- Καθάρισμα: Keep the front panel clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Συνδέσεις: Ελέγχετε περιοδικά όλες τις συνδέσεις καλωδίων για στεγανότητα και σημάδια διάβρωσης.
- Περιβάλλο: Ensure the operating environment remains within the specified temperature and humidity ranges (0°C to 50°C, 95% RH non-condensing).
Αντιμετώπιση προβλημάτων
This section addresses common issues you might encounter with the TC303A controller.
- Χωρίς εμφάνιση:
- Ελέγξτε τις συνδέσεις τροφοδοσίας.
- Επαληθεύστε την παροχή voltage is within the 85-270V AC/DC range.
- Λανθασμένη ένδειξη θερμοκρασίας:
- Ensure the sensor type configured in the controller matches the connected sensor (TC or RTD).
- Check sensor wiring for correct polarity and secure connections.
- Inspect the sensor for damage.
- Control Output Not Activating:
- Verify the setpoint is correctly configured.
- Check the control mode (PID/ON/OFF) and its parameters.
- Ensure the relay/SSR drive output is correctly wired to the controlled device.
- Check the LED status indicator for relay ON status.
For more complex issues, consult the comprehensive product manual or contact technical support.
Προδιαγραφές
| Παράμετρος | Αξία |
|---|---|
| Μοντέλο | TC303A |
| Επίδειξη | Single 3-digit, 7-segment LED |
| Τύπος ελέγχου | PID, ON/OFF Control |
| Τύποι εισόδου | TC (J, K, T, R, S), RTD (Pt100) |
| Έξοδος ελέγχου | Relay or SSR Drive |
| Προμήθεια Voltage | 85 to 270V AC/DC (50/60Hz) |
| Sampλινγκ Χρόνος | 250 ms |
| Θερμοκρασία λειτουργίας | 0°C έως 50°C (32°F έως 122°F) |
| Θερμοκρασία αποθήκευσης | -20°C έως 75°C (-4°F έως 167°F) |
| Υγρασία | 95% RH (χωρίς συμπύκνωση) |
| Επίπεδο Προστασίας | IP66 (μπροστινό πλαίσιο) |
| Pt100 Range | -150°C to 850°C, Accuracy: 0.1% of F.S. ±1°C, Resolution: 1°C |
| J Type Range | -199°C to 750°C, Accuracy: 0.25% of F.S. ±1°C, Resolution: 1°C |
| K Type Range | -199°C to 999°C, Accuracy: 0.25% of F.S. ±1°C, Resolution: 1°C |
| T Type Range | -199°C to 400°C, Accuracy: 0.25% of F.S. ±1°C, Resolution: 1°C |
| R & S Type Range | 0°C to 999°C, Accuracy: 0.5% of F.S. ±2°C, Resolution: 1°C |
Εγγύηση και υποστήριξη
For warranty information and technical support, please refer to the documentation included with your purchase or contact Ace Instruments, the manufacturer, directly. Keep your purchase receipt for warranty claims.
