Dynascan P-72 Dual Band Mobile Radio User Manual

1. Εισαγωγή και Πάνωview

The Dynascan P-72 is an advanced dual-band mobile amateur radio transceiver designed for reliable communication across VHF and UHF frequencies. Its compact size and robust feature set make it ideal for various amateur radio applications. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Dynascan P-72.

Βασικά Χαρακτηριστικά:

• Full Duplex Capability
• Simultaneous Reception of VHF and UHF Frequencies (144-146 MHz / 430-440 MHz)
• 20W Transmission Power
• 255 κανάλια μνήμης
• Side Jack for Microphone-Headset or Speaker-Microphone
• Selectable Frequency Steps: 5, 6.25, 10, 12.5, 25, 50, and 100 kHz
• Λειτουργία κλειδώματος πληκτρολογίου
• Integrated DTMF Keypad
• TOT (Time-Out Timer) Function
• Λειτουργία VOX
• Built-in Scanner
• Supports 53 CTCSS Tones and 108 DCS Tones
• Backlit LCD Display with Function Indicator
• Commercial FM Radio Function
• Εξαιρετικά συμπαγές μέγεθος

2. Περιεχόμενα συσκευασίας

Please check the box carefully to ensure all items are present and in good condition:

• Dynascan P-72 Transceiver Unit
• Handheld Speaker Microphone with Keypad
• Καλώδιο τροφοδοσίας DC
• Βάση στήριξης και υλικό

Εικόνα 2.1: Dynascan P-72 package contents, including the main transceiver unit, handheld speaker microphone, mounting bracket, and power cable.

3. Ρύθμιση

Follow these steps to set up your Dynascan P-72 for initial operation.

3.1 Σύνδεση του μικροφώνου

Connect the coiled cable of the handheld speaker microphone to the dedicated jack on the side of the transceiver unit. Ensure the connector is fully inserted to establish a secure connection.

3.2 Σύνδεση ρεύματος

Connect the supplied DC power cable to the power input on the rear of the transceiver. Connect the other end of the power cable to a stable 13.8 VDC power source capable of supplying sufficient current (e.g., a regulated power supply or vehicle battery). Observe correct polarity (red for positive, black for negative).

3.3 Σύνδεση κεραίας

Connect a suitable 50 Ohm dual-band antenna (VHF/UHF) to the antenna connector on the rear of the transceiver. Ensure the connection is tight and secure. Never transmit without an antenna connected, as this can damage the transceiver.

Εικόνα 3.1: The Dynascan P-72 transceiver with its handheld speaker microphone connected, showing the main display.

4. Οδηγίες λειτουργίας

This section details the basic operation of your Dynascan P-72.

4.1 Ενεργοποίηση/Απενεργοποίηση

Για να ενεργοποιήσετε τη μονάδα, πατήστε παρατεταμένα το ΕΞΟΥΣΙΑ button (usually located on the front panel or microphone). To power off, press and hold the same button again.

4.2 Ρύθμιση έντασης ήχου και φίμωσης

• Τόμος: Περιστρέψτε το ΤΟΜ knob (or use volume controls on the microphone) to adjust the audio output level.
• Συντρίβω: Περιστρέψτε το SQL knob to set the squelch level. Adjust it until background noise disappears, but weak signals can still be heard.

4.3 Frequency Selection (VFO Mode)

In VFO (Variable Frequency Oscillator) mode, you can directly input or tune to desired frequencies.

1. Πατήστε το VFO/MR button to switch to VFO mode.
2. Use the main tuning knob on the transceiver or the up/down arrows on the microphone to adjust the frequency.
3. Alternatively, use the DTMF keypad on the microphone to directly enter the desired frequency.

4.4 Channel Operation (Memory Mode)

The P-72 supports 255 memory channels for storing frequently used frequencies and settings.

1. Πατήστε το VFO/MR button to switch to Memory mode.
2. Use the tuning knob or up/down arrows to scroll through stored memory channels.
3. Refer to the full manual for detailed instructions on storing and deleting memory channels.

4.5 Transmission (PTT)

Για μετάδοση, πατήστε παρατεταμένα το PTT (Push-To-Talk) button on the side of the handheld microphone. Speak clearly into the microphone. Release the PTT button to return to receive mode.

4.6 Dual Frequency Reception and Full Duplex

The Dynascan P-72 can receive two frequencies simultaneously (VHF and UHF). It also supports full duplex operation, allowing you to transmit on one band while receiving on another.

• The display will show both active frequencies.
• Χρησιμοποιήστε το A/B button to select which frequency is active for transmission.

Εικόνα 4.1: Γωνία view of the Dynascan P-72, highlighting the display and control knobs.

5. Συντήρηση

Proper maintenance ensures the longevity and optimal performance of your Dynascan P-72.

5.1 Καθαρισμός

Wipe the transceiver and microphone with a soft, dry cloth. For stubborn dirt, use a slightly damp ένα πανί με ήπιο σαπούνι και στη συνέχεια σκουπίστε το. Μην χρησιμοποιείτε σκληρά χημικά, διαλύτες ή λειαντικά καθαριστικά.

5.2 Αποθήκευση

When not in use for extended periods, store the unit in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust. Disconnect the power cable and antenna.

5.3 Antenna and Cable Care

Regularly inspect antenna connections and cables for any signs of wear, damage, or corrosion. Ensure all connections remain tight to prevent signal loss and potential damage to the transceiver.

6. Αντιμετώπιση Προβλημάτων

If you encounter issues with your Dynascan P-72, refer to the following common problems and solutions.

For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact your dealer or a qualified service technician.

7. Προδιαγραφές

Detailed technical specifications for the Dynascan P-72.

8. Εγγύηση και υποστήριξη

The Dynascan P-72 is manufactured by Pihernz Comunicaciones. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized dealer. Keep your proof of purchase for any warranty claims.