Εγχειρίδιο χρήστη για φορητή ζυγαριά μεταφοράς Brecknell LPS150

1. Εισαγωγή

This manual provides essential instructions for the proper setup, operation, and maintenance of your Brecknell LPS150 Portable Shipping Scale. Please read this manual thoroughly before using the scale to ensure safe and efficient operation. The LPS150 is designed for shipping, warehouse, and general-purpose weighing applications, offering portability and ease of use.

2. Πληροφορίες Ασφάλειας

• Do not overload the scale beyond its maximum capacity of 150 lbs (68 kg).
• Avoid dropping the scale or subjecting it to severe shocks.
• Do not immerse the scale or its components in water or other liquids.
• Χρησιμοποιήστε μόνο τον παρεχόμενο προσαρμογέα AC ή τις καθορισμένες μπαταρίες.
• Κρατήστε τη ζυγαριά μακριά από ισχυρά ηλεκτρομαγνητικά πεδία.
• Ensure the scale is placed on a stable, level surface during operation.

3. Τι υπάρχει στο κουτί

Αποσυσκευάστε προσεκτικά όλα τα εξαρτήματα και βεβαιωθείτε ότι έχετε λάβει τα ακόλουθα:

• Weighing Platform with Indicator and Bracket
• Μετασχηματιστής εναλλασσόμενου ρεύματος
• 4 x AAA μπαταρίες
• Καλώδιο RS-232
• Εγχειρίδιο χρήστη (αυτό το έγγραφο)

Image 3.1: All components included with the Brecknell LPS150 Portable Shipping Scale.

4. Το προϊόν τελείωσεview

4.1 Εξαρτήματα

The Brecknell LPS150 scale consists of a stainless steel weighing platform and a remote LCD indicator connected by a coiled cable. The indicator features a digital display and control buttons.

Image 4.1: Labeled diagram of the LPS150 scale components.

4.2 Οθόνη και χειριστήρια

The indicator features a 0.63-inch, 5-digit LCD display. The operator keys include:

• ON / OFF / ZERO: Powers the scale on or off, and zeros the display.
• ΜΟΝΑΔΕΣ: Changes the weighing unit (lb, kg, lb/oz).
• ΑΠΟΒΑΡΟ: Subtracts the weight of a container.
• HOLD / PRINT: Holds the displayed weight or sends data via RS-232.

5. Ρύθμιση

5.1 Τοποθέτηση

Place the weighing platform on a firm, level, and stable surface. Ensure there are no obstructions around the platform that could interfere with accurate weighing. The indicator can be placed on a desk or mounted to a wall using the included bracket.

Εικόνα 5.1: Πρώηνample of scale placement with wall-mounted indicator.

5.2 Σύνδεση ρεύματος

The LPS150 scale can be powered by either the included AC adapter or four AAA batteries.

• Μετασχηματιστής AC: Connect the AC adapter to the power input port on the indicator and plug it into a standard electrical outlet.
• Μπαταρίες: Open the battery compartment on the back of the indicator and insert four AAA batteries, observing correct polarity.

5.3 Connecting the Indicator to the Platform

Connect the coiled cable from the weighing platform to the corresponding port on the indicator. Ensure the connection is secure.

6. Οδηγίες λειτουργίας

6.1 Βασική Ζύγιση

1. Πατήστε το ON / OFF / ZERO button to power on the scale. The display will show "0.00" when ready.
2. Place the item to be weighed gently on the center of the weighing platform.
3. Read the weight displayed on the LCD.
4. Remove the item from the platform. The display should return to zero. If not, press ON / OFF / ZERO to re-zero.

Image 6.1: The LPS150 scale ready for weighing.

Image 6.2: Weighing a package on the LPS150 scale.

6.2 Μετατροπή μονάδων

Για να αλλάξετε τη μονάδα ζύγισης:

• With the scale on and displaying weight, press the ΜΟΝΑΔΕΣ κουμπί.
• The display will cycle through available units: pounds (lb), kilograms (kg), and pounds/ounces (lb/oz).
• Release the button when the desired unit is shown.

6.3 Λειτουργία Tare

The Tare function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

1. Τοποθετήστε ένα άδειο δοχείο στην πλατφόρμα ζύγισης.
2. Περιμένετε να σταθεροποιηθεί το βάρος.
3. Πατήστε το ΑΠΟΒΑΡΟ button. The display will return to "0.00" and the TARE indicator will illuminate.
4. Add items to the container. The display will show only the weight of the added items.
5. To clear the tare, remove the container from the platform and press the ΑΠΟΒΑΡΟ κουμπί ξανά.

6.4 Λειτουργία κράτησης

The Hold function allows you to temporarily freeze the displayed weight, which is useful for weighing large or awkwardly shaped items that might obscure the display.

• Τοποθετήστε το αντικείμενο στην πλατφόρμα.
• Once the weight is stable, press the HOLD / PRINT button. The displayed weight will be held, and the HOLD indicator will illuminate.
• To release the held weight, press the HOLD / PRINT κουμπί ξανά.

6.5 RS-232 Communication Setup (for UPS Worldship)

The LPS150 scale includes an RS-232 port for data communication with compatible software, such as UPS Worldship. Correct configuration of both the scale and your computer's serial port is crucial for proper functionality.

6.5.1 Διαμόρφωση κλίμακας

1. Ensure the scale is powered off.
2. Πατήστε και κρατήστε πατημένο το ON / OFF / ZERO κουμπί και το ΜΟΝΑΔΕΣ button simultaneously until the display shows "P1". This enters the setup menu.
3. Πατήστε το ΑΠΟΒΑΡΟ button repeatedly to cycle through the programming parameters (P1, P2, P3, etc.) until you reach P4.
4. At P4, press the ΜΟΝΑΔΕΣ button to change the setting to 7 (NCI protocol).
5. Πατήστε το ΑΠΟΒΑΡΟ button to save the P4 setting and advance to P5.
6. At P5, press the ΜΟΝΑΔΕΣ button to change the setting to 2 (4800 baud rate).
7. Πατήστε το ΑΠΟΒΑΡΟ button to save the P5 setting and advance to P6.
8. At P6, press the ΜΟΝΑΔΕΣ button to change the setting to 2 (7E1 data format).
9. Πατήστε το ON / OFF / ZERO button to save all settings and exit the setup menu.

6.5.2 Computer Serial Port Configuration (Windows PC)

1. Connect the RS-232 cable from the scale indicator to an available serial port on your computer. If your computer does not have a serial port, a USB-to-serial adapter may be required.
2. Open Device Manager (search for "Device Manager" in the Windows search bar).
3. Expand the "Ports (COM & LPT)" section.
4. Identify the COM port assigned to your scale (e.g., COM1, COM3). Double-click on it to open its Properties.
5. Go to the "Port Settings" tab and configure as follows:
   • Bits ανά δευτερόλεπτο: 4800
   • Bits δεδομένων: 7
   • Ισοτιμία: Ακόμη και
   • Stop Bits: 1
   • Έλεγχος ροής: Κανένα
6. Click "OK" to save the settings and close Device Manager.

6.5.3 UPS Worldship Configuration

1. Open UPS Worldship software.
2. Navigate to the "Tools" tab.
3. Select "System Preferences" and then click on "Hardware".
4. Under the Scale settings, change the "Scale port" to the COM port you identified in Device Manager (e.g., COM1).
5. Change the "Scale Type" to "NCI 3835".
6. Click "Test Scale" to verify communication. The weight from the scale should now be reported in Worldship.

7. Συντήρηση

7.1 Καθαρισμός

To maintain accuracy and prolong the life of your scale:

• Wipe the platform and indicator with a soft, damp πανί.
• Μην χρησιμοποιείτε λειαντικά καθαριστικά, διαλύτες ή σκληρές χημικές ουσίες.
• Ensure no liquids enter the indicator or the gaps around the platform.

7.2 Αντικατάσταση μπαταρίας

If the scale is powered by batteries and the display becomes dim or erratic, it's time to replace the batteries. Open the battery compartment on the back of the indicator, remove the old batteries, and insert four new AAA batteries, ensuring correct polarity.

8. Αντιμετώπιση Προβλημάτων

9. Προδιαγραφές

10. Εγγύηση και υποστήριξη

Brecknell products are manufactured to high standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Brecknell webτοποθεσία.

For technical assistance, troubleshooting, or spare parts, please contact Brecknell customer support. Have your model number (LPS150) and purchase information ready when contacting support.

Brecknell Contact Information:
Please refer to the official Brecknell webστον ιστότοπο ή στη συσκευασία του προϊόντος σας για τα πιο πρόσφατα στοιχεία επικοινωνίας.