Nitrous Outlet 00-61002

Nitrous Outlet ProMax Dual Channel Progressive Controller Instruction Manual

Πρότυπο: 00-61002

Εισαγωγή

The Nitrous Outlet ProMax Progressive Controller is an advanced system designed to optimize nitrous delivery for performance applications. It integrates system activation and safety functions with extensive tuning and traction aids. This manual provides essential information for the proper installation, operation, and maintenance of your ProMax controller.

Περιεχόμενα συσκευασίας

Βεβαιωθείτε ότι όλα τα εξαρτήματα είναι παρόντα πριν ξεκινήσετε την εγκατάσταση:

Nitrous Outlet ProMax Controller and included accessories

Εικόνα 1: ProMax Progressive Controller, 20-pin connector, USB flash drive, and USB cable.

Ρύθμιση και εγκατάσταση

Proper installation is crucial for the safe and effective operation of the ProMax controller. It is recommended that installation be performed by a qualified technician.

  1. Τοποθέτηση του ελεγκτή: Select a secure, dry location away from excessive heat and vibration. Ensure adequate space for wiring connections. The controller can be mounted using the integrated mounting tabs.
  2. Nitrous Outlet ProMax Controller installed in a vehicle's glove compartment

    Εικόνα 2: Example installation of the ProMax controller in a vehicle's glove compartment.

  3. Συνδέσεις καλωδίωσης: Connect the 20-pin wiring harness to the controller. Carefully follow the wiring diagram provided in the separate wiring guide (not included in this manual) for connecting to vehicle power, ground, sensors (Vehicle Speed, Trans Brake, MAP Sensor, Wide Band O2, Nitrous Pressure, Fuel Pressure), and solenoid drivers.
  4. Σύνδεση υπολογιστή: Connect the controller to a PC/laptop using the provided USB cable for initial setup and programming.
  5. Εγκατάσταση λογισμικού: Install the ProMax tuning software from the provided USB flash drive onto your PC.
  6. Nitrous Outlet ProMax Controller with wiring harness and USB cable

    Εικόνα 3: The ProMax controller with its wiring harness and USB cable for connection.

  7. Ενημέρωση υλικολογισμικού: Ensure the controller has the latest firmware. Firmware updates can be performed via the PC software.

Οδηγίες Λειτουργίας

The ProMax controller offers extensive tuning capabilities. Refer to the software manual for detailed instructions on each function.

Συντήρηση

The Nitrous Outlet ProMax controller is designed for reliability with minimal maintenance. Adhere to the following guidelines:

Αντιμετώπιση προβλημάτων

This section provides general troubleshooting steps. For specific issues, consult the detailed software manual or contact technical support.

ΠρόβλημαΠιθανή αιτίαΔιάλυμα
Ο ελεγκτής δεν ενεργοποιείταιIncorrect wiring, blown fuse, loose connectionVerify power and ground connections. Check vehicle fuses. Ensure harness is securely connected.
Nitrous system not activatingIncorrect activation settings, solenoid driver issue, sensor malfunctionCheck activation parameters in software (TPS, WOT, RPM). Test solenoid drivers. Verify sensor inputs.
PC software not connecting to controllerUSB cable issue, driver not installed, controller not poweredEnsure controller is powered. Try a different USB port/cable. Reinstall USB drivers.
Inconsistent nitrous deliveryIncorrect progressive ramp settings, pressure fluctuations, solenoid issuesReview progressive ramp settings. Check nitrous bottle pressure. Inspect solenoids for proper function.

Προδιαγραφές

ΧαρακτηριστικόΛεπτομέρεια
Αριθμός μοντέλου00-61002
ΚατασκευαστήςNitrous Outlet
Διαστάσεις προϊόντος6 x 7 x 12 ίντσες
Βάρος αντικειμένου3 λίρες
Solenoid Drivers2 independent, 70 Amp
Progressive Frequency10-30 Hz (adjustable by 1 Hz)
Tune StorageUp to 5 internal tune-ups
Ignition Retard Outputs2
ΕισροέςVehicle Speed, Trans Brake, MAP Sensor, Two Wide Band O2 sensors, Two Nitrous Pressure Sensors, Fuel Pressure Sensor
ΣυνδεσιμότηταUSB, CAN Bus Output
Ειδικά ΧαρακτηριστικάUpdateable Firmware, Datalogging Capable, Multi-gear lockout, Resume and restart feature

Πληροφορίες εγγύησης

Nitrous Outlet products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official warranty statement included with your product or visit the Nitrous Outlet official webτοποθεσία. Κρατήστε την απόδειξη αγοράς για τυχόν αξιώσεις εγγύησης.

Νομική αποποίηση ευθύνης: Nitrous Outlet is not responsible for parts not being smog-legal in your area. Many parts are not legal for sale or use in California, or on any pollution controlled vehicle. It is your responsibility to be aware of your local emissions laws and checking for legality of any parts purchased.

Υποστήριξη

For technical assistance, questions regarding installation, operation, or troubleshooting, please contact Nitrous Outlet customer support:

Σχετικά Έγγραφα - 00-61002

Προview Nitrous Outlet Purge Kit Installation Guide and Wiring
Detailed installation instructions and wiring diagram for the Nitrous Outlet Purge Kit (Part #'s 00-62000, 00-62001, 00-62008). Learn how to improve nitrous system performance with this in-line purge system.
Προview Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket Installation Guide
Detailed installation instructions and system wiring diagram for the Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket (Part Number: 00-51045). Learn how to properly mount and wire this component for your vehicle's nitrous oxide system.
Προview Οδηγός εγκατάστασης βάσης φιάλης Nitrous Outlet 2010-2015 Camaro Rear Hatch
Αναλυτικές οδηγίες εγκατάστασης για τη βάση φιάλης αζώτου Nitrous Outlet 2010-2015 Camaro Rear Hatch 10lb & 15lb (Κωδικός εξαρτήματος: 00-33002). Μάθετε πώς να τοποθετήσετε σωστά τη φιάλη αζώτου για το Chevrolet Camaro σας.
Προview Οδηγίες εγκατάστασης συστήματος αζωτούχων πλακών Ford Mustang EcoBoost 2015-2020
Πλήρης οδηγός εγκατάστασης για το σύστημα πλακών Nitrous Outlet 00-10192-XX που έχει σχεδιαστεί για το Ford Mustang EcoBoost 2015-2020. Περιλαμβάνει εργαλεία, υλικά, διαδικασίες βήμα προς βήμα και προειδοποιήσεις ασφαλείας.
Προview Οδηγός εγκατάστασης μετατροπής πλάκας διαχωρισμού ανεμιστήρα Hemi για Dodge Hellcat 6.2L 2015-2023
Οδηγίες εγκατάστασης βήμα προς βήμα για τη μετατροπή της πλάκας διαχωρισμού φυσητήρα Trackhawk για το Nitrous Outlet 2015-2023 6.2L Hemi Hellcat Challenger/Charger/Red Eye/Demon και της πλάκας διαχωρισμού φυσητήρα Trackhawk 2018-2019. Περιλαμβάνει τα απαραίτητα εργαλεία, την αποσυναρμολόγηση, την εγκατάσταση της πλάκας, την εγκατάσταση του ακροφυσίου, την εγκατάσταση της γραμμής και την τελική συναρμολόγηση.
Προview Οδηγίες εγκατάστασης πίνακα διακοπτών Silverado/Sierra 2007-14
Λεπτομερής οδηγός εγκατάστασης για τον πίνακα διακοπτών Nitrous Outlet 2007-14 Silverado/Sierra (Αριθμός εξαρτήματος 00-11047), σχεδιασμένο για φορτηγάκια Chevrolet και GMC πλήρους μεγέθους. Περιλαμβάνει τα απαραίτητα εργαλεία, οδηγίες βήμα προς βήμα και διαγράμματα καλωδίωσης.