Εισαγωγή
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hunter 99179 Original Ceiling Fan Remote Control and Canopy Kit. This kit is specifically designed to enhance the functionality of Hunter "Original" series ceiling fans by adding remote control capabilities for fan speeds and lighting.
The kit includes a remote control unit and a canopy designed to house the receiver. It integrates with your existing two-wire fan setup, offering convenient control over three fan speeds and the fan's light fixture.
Σημαντικές πληροφορίες για την ασφάλεια
- Ηλεκτρική ασφάλεια: Always disconnect power at the circuit breaker or fuse box before attempting any installation, maintenance, or repair. Failure to do so can result in serious injury or death.
- Αρμονία: This kit is designed for use ΜΟΝΟ with Hunter "Original" series ceiling fans. It is not compatible with other fan models or brands.
- Downrod Requirement: Installation requires a downrod of 12 inches or longer (sold separately). The receiver unit is designed to fit within the canopy, which necessitates sufficient space provided by a longer downrod.
- Επαγγελματική εγκατάσταση: If you are unfamiliar with electrical wiring or ceiling fan installation, it is recommended to consult a qualified electrician.
- Τοπικοί Κώδικες: Ensure all installation procedures comply with local electrical codes and ordinances.
- Ακεραιότητα προϊόντος: Μην τροποποιείτε το προϊόν ή το χρησιμοποιείτε για σκοπούς διαφορετικούς από την προβλεπόμενη χρήση του.
Περιεχόμενα συσκευασίας
Βεβαιωθείτε ότι όλα τα εξαρτήματα είναι παρόντα πριν ξεκινήσετε την εγκατάσταση:
- Μονάδα τηλεχειρισμού
- Απομακρυσμένος δέκτης
- Canopy (for receiver housing)
- Mounting Hardware (screws, wire nuts, etc. - specific items may vary)

Image: A Hunter ceiling fan, representative of the type of fan compatible with the 99179 remote and canopy kit.
Ρύθμιση και εγκατάσταση
Follow these steps carefully to install your Hunter 99179 Remote Control and Canopy Kit:
- Αποσύνδεση ρεύματος: Before starting, turn off the electrical power to your ceiling fan at the main circuit breaker or fuse box.
- Καλωδίωση πρόσβασης: Carefully lower the existing canopy from your Hunter Original ceiling fan to expose the wiring connections.
- Remove Old Receiver (if applicable): If an old receiver is present, disconnect its wiring and remove it.
- Εγκατάσταση νέου δέκτη: Connect the new remote receiver's wires to the corresponding fan and household wires. Ensure all connections are secure using wire nuts. The receiver is designed to fit within the new canopy.
- Position Canopy: Carefully tuck the wired receiver into the new canopy. Ensure no wires are pinched.
- Ασφαλές στέγαστρο: Mount the new canopy securely to the fan's mounting bracket. Confirm that the downrod is at least 12 inches long to accommodate the receiver within the canopy.
- Επαναφορά ισχύος: Once installation is complete and all connections are secure, restore power to the ceiling fan at the circuit breaker.
- Σύζευξη τηλεχειριστηρίου: Follow the instructions provided with the remote control unit to pair it with the newly installed receiver. This typically involves pressing a button on the remote within a short time after restoring power.
Σημείωμα: The new canopy is designed to accommodate the receiver. Some older Hunter Original fan mounting plates or downrods may not be compatible with the new canopy's dimensions. Verify fit before final installation.
Οδηγίες Λειτουργίας
Your Hunter 99179 remote control provides convenient operation of your ceiling fan and light:
- Έλεγχος ταχύτητας ανεμιστήρα: Use the designated buttons on the remote to cycle through three fan speeds (Low, Medium, High) or to turn the fan off.
- Έλεγχος φωτός: Use the light button to turn the fan light on or off. Some remotes may also support dimming functions if your fan and light kit are compatible.
- Αντικατάσταση μπαταρίας: If the remote control stops responding, replace the batteries. Refer to the remote's specific instructions for battery type and replacement procedure.
Συντήρηση
To ensure optimal performance and longevity of your Hunter 99179 kit:
- Καθάρισμα: Periodically wipe the remote control and canopy with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Έλεγχος μπαταρίας: Αντικαταστήστε τις μπαταρίες του τηλεχειριστηρίου όπως απαιτείται για να διατηρήσετε την αξιόπιστη λειτουργία του.
- Επιθεώρηση καλωδίωσης: Annually, or if issues arise, ensure all electrical connections within the canopy are secure and free from corrosion. Always disconnect power before inspection.
Αντιμετώπιση προβλημάτων
If you encounter issues with your remote control and canopy kit, refer to the following common solutions:
| Πρόβλημα | Πιθανή αιτία | Διάλυμα |
|---|---|---|
| Remote not responding / Fan or light not working |
|
|
| Canopy does not fit / Receiver cannot be housed |
|
|
| Παρεμβολές από άλλες συσκευές |
|
|
Προδιαγραφές
- Αριθμός μοντέλου: 99179
- Κατασκευαστής: Hunter Fan Company
- Διαστάσεις προϊόντος: Περίπου 6 x 6 x 7 ίντσες
- Βάρος αντικειμένου: Περίπου 2.35 κιλά
- Τομtage: 120 Volt
- Πηγή ενέργειας: Ενσύρματο-ηλεκτρικό
- Υλικό: Μέταλλο
- Πιστοποίηση: Εισηγμένο ETL
- Χρήση: Ceiling fan remote control and canopy accessory
- Ειδικό χαρακτηριστικό: Βαρέως τύπου κατασκευή
- Συμβατές συσκευές: Hunter "Original" series ceiling fans
Πληροφορίες εγγύησης
No specific warranty description is provided for the Hunter 99179 Remote Control and Canopy Kit in the product details. For warranty inquiries, please contact Hunter Fan Company directly or refer to the documentation included with your original Hunter "Original" ceiling fan.
Υποστήριξη Πελατών
For further assistance, technical support, or to inquire about parts, please visit the official Hunter Fan Company webστον ιστότοπο ή επικοινωνήστε με το τμήμα εξυπηρέτησης πελατών τους.
Hunter Fan Company Webτοποθεσία: Visit the Hunter Store on Amazon