Εισαγωγή
The ScreenBeam MyWirelessTV2 system provides a wireless solution for transmitting high-definition video and audio from your HDMI-enabled media devices to an HDTV or projector. This system eliminates the need for long HDMI cables, offering flexibility in TV placement and reducing cable clutter. It supports Full HD 1080P resolution and 5.1 surround sound, with a range of up to 150 feet through walls, floors, and ceilings.
Τι Περιλαμβάνεται
Πριν ξεκινήσετε την εγκατάσταση, βεβαιωθείτε ότι όλα τα εξαρτήματα υπάρχουν στη συσκευασία:
- 1 Wireless HD Transmitter
- 1 Wireless HD Receiver
- 2 προσαρμογείς ισχύος
- 2 καλώδια HDMI
- 1 Καλώδιο IR Blaster
- 1 IR Receiver Extension Cable
- 2 Velcro Adhesive Mounts
- Οδηγός γρήγορης εκκίνησης
Figure 1: Package Contents of MyWirelessTV2 Kit
Οδηγίες εγκατάστασης
Follow these steps to set up your MyWirelessTV2 system:
- Συνδέστε τον πομπό: Connect one end of an HDMI cable to the HDMI output of your media source (e.g., cable box, Blu-ray player, gaming console). Connect the other end of the HDMI cable to the Είσοδος HDMI port on the MyWirelessTV2 Transmitter.
- Connect Transmitter Power: Plug one power adapter into the 5V DC / 2A port on the Transmitter and then into a power outlet. The Power LED on the transmitter will illuminate.
- Συνδέστε τον δέκτη: Connect one end of the second HDMI cable to the HDMI Out to TV port on the MyWirelessTV2 Receiver. Connect the other end of the HDMI cable to an available HDMI input on your HDTV or projector.
- Connect Receiver Power: Plug the second power adapter into the 5V DC / 2A port on the Receiver and then into a power outlet. The Power LED on the receiver will illuminate.
- IR Blaster Setup (Optional): If you wish to control your source device (e.g., cable box) from the TV location, connect the IR Blaster cable to the Μετάδοση υπερύθρων port on the Transmitter. Position the IR Blaster emitter directly over the IR sensor of your source device. Connect the IR Receiver Extension Cable to the IR Ext. port on the Receiver and place the IR receiver in a location where it can receive signals from your remote control.
- Ενεργοποίηση συσκευών: Ensure both the Transmitter and Receiver are powered on. Turn on your TV and select the correct HDMI input for the Receiver. The system will automatically establish a wireless connection.
Figure 2: Transmitter and Receiver Port Diagram
Video 1: An introductory video demonstrating the ScreenBeam MyWirelessTV2, showing its application in various home entertainment scenarios and highlighting its ease of setup and use for wireless HD streaming.
Οδηγίες Λειτουργίας
Once the MyWirelessTV2 system is set up, it operates automatically. The Transmitter and Receiver will establish a connection and begin streaming content from your source device to your display.
Βασικά Χαρακτηριστικά:
- Ροή υψηλής ευκρίνειας: Enjoy clear 1080p60 HD video and 3D content.
- Ψηφιακός ήχος: Supports 5.1 digital audio for an immersive sound experience.
- Εκτεταμένο εύρος: Transmits signals up to 150 feet through walls, floors, and ceilings.
- IR Remote Control Support: Use your existing remote control to manage your source device from the TV location via the IR Blaster and Receiver cables.
- Multi-Room Capability: Sends live HD content wirelessly to up to 3 HDTVs simultaneously (additional receivers sold separately).
- No Wi-Fi Required: The system operates on its own wireless frequency, independent of your home Wi-Fi network.
Συμβατές συσκευές:
The MyWirelessTV2 system is compatible with a wide range of HDMI-enabled devices, including:
- Cable and Satellite Set-Top Boxes
- Blu-ray and DVD Players
- Gaming Consoles (e.g., Xbox, PlayStation)
- Streaming Media Devices
- Any device with an HDMI output
Figure 3: Compatible HDMI Devices
Figure 4: Indoor Wireless Setup Example
Figure 5: Outdoor Wireless Setup Example
Συντήρηση
The MyWirelessTV2 system requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the Transmitter and Receiver units clean by wiping them with a soft, dry cloth.
- Ensure proper ventilation around both units to prevent overheating. Avoid placing them in enclosed spaces without airflow.
- Protect the units from extreme temperatures, moisture, and direct sunlight.
- Ελέγχετε περιοδικά όλες τις συνδέσεις καλωδίων για να βεβαιωθείτε ότι είναι ασφαλείς.
Αντιμετώπιση προβλημάτων
If you encounter issues with your MyWirelessTV2 system, refer to the following troubleshooting tips:
- No Picture/Sound or Intermittent Signal:
- Ensure both the Transmitter and Receiver are powered on and their power LEDs are illuminated.
- Verify that all HDMI cables are securely connected to both the source device, Transmitter, Receiver, and TV.
- Confirm your TV is set to the correct HDMI input for the Receiver.
- Check the distance between the Transmitter and Receiver. While rated for up to 150 feet, environmental factors (thick walls, metal objects, other wireless devices) can reduce range. Try moving the units closer together.
- Experiment with the orientation and placement of both the Transmitter and Receiver. Sometimes a slight adjustment (e.g., placing a unit on its side) can improve signal strength.
- Minimize obstructions between the Transmitter and Receiver. Large metal objects, concrete walls, or multiple layers of building materials can interfere with the wireless signal.
- If the screen shows a 'Connecting to Transmitter' message for an extended period, try power cycling both the Transmitter and Receiver.
- Το τηλεχειριστήριο υπερύθρων δεν λειτουργεί:
- Ensure the IR Blaster cable is securely connected to the Transmitter and its emitter is positioned directly over the IR sensor of your source device.
- Verify the IR Receiver Extension Cable is connected to the Receiver and placed where it can clearly receive signals from your remote.
- Check for any obstructions between your remote control and the IR Receiver.
- Picture Quality Issues (Fuzzy/Compressed):
- This can sometimes occur briefly upon initial connection or power-up. The system should quickly adjust to optimal quality. If it persists, refer to the signal troubleshooting steps above.
Προδιαγραφές
| Χαρακτηριστικό | Προσδιορισμός |
|---|---|
| Μάρκα | ScreenBeam |
| Αριθμός μοντέλου | MWTV2KIT01 |
| Τεχνολογία Συνδεσιμότητας | Ασύρματος |
| Τύπος σύνδεσης | Plug In (HDMI) |
| Συμβατές Συσκευές | Television, Projectors, HDMI-enabled media sources |
| Ανάλυση βίντεο | Up to 1080p60, 3D video |
| Υποστήριξη ήχου | 5.1 Ψηφιακός ήχος |
| Wireless Σειρά | Up to 150 feet (line of sight, actual range varies with environment) |
| Έξοδος Wattage | 5 Watt |
| Βάρος αντικειμένου | 10.4 ουγγιές |
| Διαστάσεις προϊόντος | 4.8 x 4.3 x 1 ίντσες |
| Χρώμα | Μαύρος |
| Απαιτούνται μπαταρίες | 1 Lithium Ion battery (for IR remote, not included with main units) |
Πληροφορίες εγγύησης
For detailed warranty information regarding your ScreenBeam MyWirelessTV2, please refer to the official ScreenBeam webιστότοπο ή την κάρτα εγγύησης που συνοδεύει το προϊόν σας. Οι όροι και οι προϋποθέσεις της εγγύησης ενδέχεται να διαφέρουν ανάλογα με την περιοχή και τον πωλητή.
Υποστήριξη Πελατών
If you require further assistance or have questions not covered in this manual, please visit the official ScreenBeam support website for FAQs, software updates, and contact information for technical support.
