DigiTech DOD250-13

DOD Overdrive 250 Αναλογικό Overdrive Προ-amp Εγχειρίδιο χρήστη

Model: DOD250-13

Εισαγωγή

The DOD Overdrive Preamp 250 is a legendary analog overdrive pedal designed for guitar and bass instruments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DOD Overdrive 250 to ensure optimal performance and longevity.

Ρύθμιση

Τροφοδοσία του Πεντάλ

The DOD Overdrive 250 can be powered by a single 9V alkaline dry battery or an optional 9V DC power supply (PS0913DC). Ensure the power source is correctly connected before use.

DOD Overdrive 250 pedal showing the 9V DC power supply input jack on the side.

Εικόνα 1: Power Supply Connector. Connect a 9V DC power adapter here.

Σύνδεση του πεντάλ σας

Συνδέστε το όργανό σας στο IN jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the ΕΞΩ υποδοχή στην αριστερή πλευρά του πεντάλ στο δικό σας amplifier or the next pedal in your signal chain using another 1/4-inch instrument cable.

DOD Overdrive 250 pedal showing the input and output jacks on the sides.

Εικόνα 2: Input and Output Jacks. The input jack is on the right, and the output jack is on the left.

Χειρισμός του Πεντάλ

The DOD Overdrive 250 features two primary control knobs: ΚΕΡΔΟΣ και ΕΠΙΠΕΔΟ, along with a footswitch and an LED indicator.

Κορυφή view of the DOD Overdrive 250 pedal showing the Gain and Level knobs, footswitch, and blue LED.

Εικόνα 3: Front Panel Controls. The Gain and Level knobs are at the top, with the footswitch and LED below.

Έλεγχοι

  • ΚΕΡΔΟΣ: This knob controls the amount of overdrive or distortion applied to your signal. Turning it clockwise increases the saturation, ranging from a subtle grit to a full, aggressive grind.
  • ΕΠΙΠΕΔΟ: This knob adjusts the overall output volume of the pedal. It can be used to match the bypassed signal volume, or to provide a significant boost for solos or to push your amplifier harder. With the Gain set low, increasing the Level can provide a clean boost.

Ποδοδιακόπτης και ένδειξη LED

The large footswitch activates or bypasses the effect. When the effect is active, the crisp blue LED indicator will illuminate, providing clear visual feedback of the pedal's status.

DOD Overdrive 250 pedal with an arrow pointing to the blue LED indicator.

Εικόνα 4: Crisp Blue LED Indication. The LED illuminates when the effect is active.

Αληθής παράκαμψη

The DOD Overdrive 250 features true bypass circuitry. This means that when the pedal is disengaged (effect off), your guitar's signal passes directly through the pedal without any electronic interference, preserving your original tone. This is a significant improvement over older designs that could color the bypassed signal.

Συντήρηση

Αντικατάσταση μπαταρίας

If using a 9V battery, replace it when the LED indicator dims or the pedal's performance degrades. To replace the battery, carefully remove the bottom plate of the pedal. Disconnect the old battery and connect a new 9V alkaline battery, ensuring correct polarity. Securely reattach the bottom plate.

Καθάρισμα

Wipe the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.

Αποθήκευση

When not in use for extended periods, disconnect the power supply or remove the battery to prevent leakage and preserve battery life. Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.

Αντιμετώπιση προβλημάτων

ΠρόβλημαΠιθανή αιτίαΔιάλυμα
Χωρίς ήχο ή αδύναμο σήμαIncorrect cable connections, dead battery, faulty power supply, pedal not engaged.Check all cable connections. Replace 9V battery or verify power supply connection. Ensure the pedal is engaged (blue LED on). Test with different cables.
Ανεπιθύμητος θόρυβος ή βουητόGround loop, faulty cables, interference from other electronics, power supply issues.Ensure all equipment is properly grounded. Try different cables. Move pedal away from power transformers or fluorescent lights. Use a regulated power supply.
Η λυχνία LED δεν ανάβειNo power, dead battery, faulty LED.Check power supply or replace battery. If problem persists, contact support.

Προδιαγραφές

ΧαρακτηριστικόΛεπτομέρεια
ΜοντέλοDOD250-13
Διαστάσεις (Μ x Π x Υ)4.88 x 2.61 x 3.25 ίντσες
Βάρος9.92 ounces (~0.62 lbs)
Εισαγωγή(εις)1/4-inch Instrument
Έξοδος(ες)1/4-inch Instrument
Υλικό πλαισίουAll Metal (Aluminum)
Τροφοδοτικό9V Alkaline Dry Battery or 9V DC (PS0913DC)
Μορφή σήματοςΑναλογικό
ΧρώμαYellow Metallic Flake

Εγγύηση και υποστήριξη

For detailed warranty information, please refer to the documentation included with your purchase or visit the official DigiTech website. DigiTech provides support for their products through their authorized service centers and online resources.

You can find more information and contact support via the official DigiTech store: Κατάστημα DigiTech στο Amazon.

Note: No official product videos from the seller were found in the provided data to be embedded in this manual.

Σχετικά Έγγραφα - DOD250-13

Προview Επεξεργαστής σήματος κιθάρας/ποδοελεγκτής και προ-ρυθμιστής DigiTech RP-10amp Εγχειρίδιο κατόχου
This owner's manual provides comprehensive details on the DigiTech RP-10 Guitar Signal Processor/Foot Controller and Preamp, covering setup, operation, programming, effects, and MIDI functions.
Προview Επεξεργαστής σήματος κιθάρας/ποδοελεγκτής και προ-ρυθμιστής DigiTech RP-6amp Εγχειρίδιο κατόχου
Πλήρες εγχειρίδιο χρήσης για τον επεξεργαστή σήματος/ποδοελεγκτή κιθάρας DigiTech RP-6 και τον προενισχυτή...amp, περιγράφοντας λεπτομερώς τα χαρακτηριστικά, τις λειτουργίες, τα εφέ, τις παραμέτρους, τις προδιαγραφές και τη ρύθμισή του.
Προview Επεξεργαστής/Ελεγκτής εφέ κιθάρας DigiTech RP-1 και προ-ενισχυτήςamp Εγχειρίδιο κατόχου
Πλήρες εγχειρίδιο κατόχου για το DigiTech RP-1, που περιγράφει λεπτομερώς τα χαρακτηριστικά, τις λειτουργίες, τον προγραμματισμό, την εφαρμογή MIDI και πληροφορίες εγγύησης για κιθαρίστες.
Προview Επεξεργαστής σήματος κιθάρας/ποδοελεγκτής και προ-ρυθμιστής DigiTech RP-5amp Εγχειρίδιο κατόχου
Πλήρες εγχειρίδιο χρήσης για τον επεξεργαστή σήματος/ποδοελεγκτή κιθάρας DigiTech RP-5 και τον προενισχυτή...amp, με λεπτομέρειες για τα χαρακτηριστικά, τα χειριστήρια, τα εφέ, τις παραμέτρους, τη ρύθμιση και τις προδιαγραφές του. Μάθετε πώς να χρησιμοποιείτε τον επεξεργαστή S-DISC για εφαρμογές στούντιο και ζωντανές ζωντανές εμφανίσεις.
Προview Εγχειρίδιο κατόχου DigiTech HardWire CM-2 Tube Overdrive
Εγχειρίδιο κατόχου για το πετάλι εφέ κιθάρας DigiTech HardWire CM-2 Tube Overdrive, με λεπτομέρειες για τα χαρακτηριστικά, τη λειτουργία, τις οδηγίες ασφαλείας, την εγγύηση και τις προδιαγραφές του.
Προview Πεντάλ Overdrive/Distortion για οδηγό μπάσων DigiTech - Εγχειρίδιο κατόχου
Πλήρες εγχειρίδιο χρήσης για το πεντάλ DigiTech Bass Driver Bass Overdrive/Distortion. Μάθετε για την τεχνολογία AudioDNA™, τα χειριστήρια (Level, Tone, Blend, Morph), τις συνδέσεις (Input, Out 1) Amp, Μίκτης Out 2 με μοντελοποίηση καμπίνας CIT™), εγκατάσταση, αντικατάσταση μπαταρίας, οδηγίες ασφαλείας και πληροφορίες εγγύησης.