ADJ Sweeper Beam Quad LED Instruction Manual

1. Εισαγωγή

This manual provides detailed instructions for the safe and efficient operation of your ADJ Sweeper Beam Quad LED fixture. The Sweeper Beam Quad LED is a professional stage lighting unit designed to produce dynamic lighting effects. It features eight powerful RGBW LEDs that create sweeping beams, pulse, and strobe effects with 270 degrees of tilt. This unit supports various operational modes including stand-alone, sound active, and DMX control.

2. Οδηγίες ασφαλείας

• Συνδέετε πάντα το εξάρτημα σε γειωμένο κύκλωμα.
• Βεβαιωθείτε ότι όλες οι συνδέσεις είναι ασφαλείς πριν από τη λειτουργία.
• Μην λειτουργείτε τη συσκευή εάν το καλώδιο τροφοδοσίας είναι κατεστραμμένο.
• Αποφύγετε την άμεση έκθεση των ματιών στην πηγή φωτός.
• Βεβαιωθείτε ότι υπάρχει επαρκής αερισμός γύρω από τη συσκευή για να αποτρέψετε την υπερθέρμανση.
• Αποσυνδέστε το από την παροχή ρεύματος πριν από οποιαδήποτε συντήρηση ή καθαρισμό.
• This product is for professional use. Installation should be performed by qualified personnel.

3. Ρύθμιση

3.1 Αποσυσκευασία

Carefully unpack the fixture and inspect it for any damage during shipping. If any damage is found, contact your dealer immediately.

3.2 Τοποθέτηση

The Sweeper Beam Quad LED includes mounting brackets for secure installation. Always use a safety hook on the rear panel as an additional safety measure when suspending the unit. Ensure the mounting surface can support the weight of the fixture.

3.3 Σύνδεση ρεύματος

Connect the fixture to a compatible power source using the provided IEC power cable. The unit supports daisy-chaining for power, allowing up to 4 units at 120V or 7 units at 230V to be connected from a single power outlet.

Figure 1: ADJ Sweeper Beam Quad LED fixture overview. This image displays the main unit with its eight distinct LED lenses, highlighting the robust black housing and overall design.

4. Τρόποι λειτουργίας

The Sweeper Beam Quad LED offers multiple operational modes to suit various lighting requirements.

4.1 Λειτουργία αυτόνομης λειτουργίας

In stand-alone mode, the fixture operates using its built-in programs. Use the 4-button DMX LED display on the unit to select desired pre-programmed sequences and effects.

4.2 Sound Active Mode

The sound active mode allows the fixture to react to music and audio input. The internal microphone detects sound, and the light effects will pulse and change in sync with the beat. Adjust sensitivity via the control panel if available.

4.3 Λειτουργία ελέγχου DMX

For advanced control, connect the fixture to a DMX controller using a wired digital network. The unit supports 1, 6, 35, or 39 DMX channels, providing comprehensive control over individual LEDs, tilt, dimming (0-100%), pulse, and strobe effects. Refer to the DMX channel chart (typically found in a separate DMX manual or on the manufacturer's website) for specific channel functions.

Εικόνα 2: Πρample of dynamic light beams produced by the Sweeper Beam Quad LED. This image illustrates the sweeping motion and vibrant color mixing capabilities of the fixture in operation.

Εικόνα 3: Άλλο view of the Sweeper Beam Quad LED's light output, showcasing a fan-like beam pattern. This demonstrates the fixture's ability to create diverse visual effects.

5. Συντήρηση

5.1 Καθαρισμός

To maintain optimal light output and extend the lifespan of your fixture, regularly clean the lenses and exterior casing. Use a soft, lint-free cloth and a mild glass cleaner. Ensure the fixture is disconnected from power before cleaning.

5.2 LED Lifespan

The LEDs in this fixture are rated for approximately 50,000 hours of use. Due to the low heat output of LED technology, there is no need for duty cycles, allowing for continuous operation.

6. Αντιμετώπιση Προβλημάτων

• Χωρίς ισχύ: Check the power cable connection at both the fixture and the power outlet. Ensure the outlet is active.
• Χωρίς έξοδο φωτός: Verify the fixture is receiving power. Check the selected operating mode (e.g., ensure DMX signal is present if in DMX mode).
• Fixture Not Responding to DMX: Confirm DMX cable connections are secure. Check DMX address settings on the fixture and controller. Ensure the DMX controller is sending a signal.
• Abnormal Movement/Stuck Beam: Disconnect power, wait a few moments, then reconnect. If the issue persists, contact customer support.

7. Προδιαγραφές

8. Εγγύηση και υποστήριξη

Για πληροφορίες σχετικά με την εγγύηση και την τεχνική υποστήριξη, ανατρέξτε στην τεκμηρίωση που συνοδεύει την αγορά σας ή επισκεφθείτε την επίσημη ιστοσελίδα προϊόντων ADJ. website. Contact details for customer service can typically be found there.