Εγχειρίδιο οδηγιών για ανταλλακτικές λάμπες αλογόνου Eiko H1155 σειράς H11

Εισαγωγή

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

Πληροφορίες Ασφάλειας

• ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• ΠΡΟΣΟΧΗ: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before handling.
• ΠΡΟΣΟΧΗ: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Απορρίψτε τις παλιές λάμπες υπεύθυνα σύμφωνα με τους τοπικούς κανονισμούς.

Προϊόν Πάνωview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

Εικόνα 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

Ρύθμιση και εγκατάσταση

1. Παρασκευή: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. Πρόσβαση στη λάμπα: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. Αποσυνδέστε την καλωδίωση: Αποσυνδέστε προσεκτικά τον ηλεκτρικό συνδετήρα από το πίσω μέρος της παλιάς λάμπας.
4. Αφαιρέστε την παλιά λάμπα: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. Εγκατάσταση New Bulb: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
6. Επανασύνδεση καλωδίωσης: Επανασυνδέστε τον ηλεκτρικό συνδετήρα στη νέα λάμπα.
7. Λειτουργικότητα δοκιμής: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. Επανασυναρμολόγηση: Επανατοποθετήστε τυχόν καλύμματα ή εξαρτήματα που αφαιρέθηκαν για να έχετε πρόσβαση στη λάμπα.

Σημείωμα: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

Λειτουργία

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

Συντήρηση

• Καθάρισμα: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• Επιθεώρηση: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• Χειριζόμενος: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

Αντιμετώπιση προβλημάτων

Προδιαγραφές

Εγγύηση και υποστήριξη

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting