1. Εισαγωγή
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Hager ESC225S Silent Contactor. Please read this manual thoroughly before attempting any installation or operation. Retain this document for future reference.
2. Το προϊόν τελείωσεview
The Hager ESC225S is a silent contactor designed for switching electrical loads in various applications, particularly where quiet operation is desired. It features a 25 Amp current rating and two normally open (NO) contacts, operating at 230 Volts. Its compact design allows for integration into standard electrical panels.
Μια αναλυτική view of the Hager ESC225S Silent Contactor, showing its terminals, model number, and electrical ratings. The device is white with blue accents, indicating the Hager brand and model ESC 225, with ratings of 25A and U:250V visible on the label. Connection terminals A1, A2, 1, 2, 3, and 4 are clearly marked.
3. Πληροφορίες Ασφάλειας
- Ηλεκτρικός κίνδυνος: Η εγκατάσταση και η συντήρηση πρέπει να εκτελούνται μόνο από εξειδικευμένο και εξουσιοδοτημένο προσωπικό.
- Always disconnect power to the circuit before installing, servicing, or removing the contactor.
- Ensure all wiring complies with local and national electrical codes and regulations.
- Μην λειτουργείτε τη συσκευή εάν φαίνεται να έχει υποστεί ζημιά ή έχει εκτεθεί σε υγρασία.
- Χρησιμοποιήστε κατάλληλο ατομικό προστατευτικό εξοπλισμό (ΜΑΠ) κατά την εγκατάσταση και τη συντήρηση.
4. Εγκατάσταση και εγκατάσταση
The Hager ESC225S Silent Contactor is designed for DIN rail mounting within an electrical enclosure.
4.1 Τοποθέτηση
- Ensure the electrical panel is de-energized.
- Snap the contactor onto a standard 35mm DIN rail.
- Ensure it is securely fastened and does not wobble.
4.2 Καλωδίωση
Refer to the wiring diagram on the device and the following general guidelines:
- Κύκλωμα ελέγχου: Συνδέστε το χειριστήριο voltage (230V AC) to terminals A1 and A2. A1 is typically the phase, and A2 is the neutral.
- Κύριο κύκλωμα: Connect the load circuit to the main power terminals. Terminals 1 and 3 are typically inputs, and terminals 2 and 4 are outputs for the two normally open (NO) contacts.
- Βεβαιωθείτε ότι όλες οι συνδέσεις είναι σφιχτές και ασφαλείς για να αποφύγετε χαλαρές επαφές και υπερθέρμανση.
- Use appropriate wire gauges for the 25 Amp τρέχουσα βαθμολογία.
5. Λειτουργία
Once properly installed and wired, the Hager ESC225S Silent Contactor operates by receiving a control signal at its A1/A2 terminals. When the control voltage is applied, the internal coil is energized, closing the normally open contacts (1-2 and 3-4), thereby allowing power to flow to the connected load. When the control voltage is removed, the coil de-energizes, and the contacts open, interrupting the power to the load. The 'silent' characteristic refers to its low-noise switching operation.
6. Συντήρηση
The Hager ESC225S Silent Contactor is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:
- Οπτική επιθεώρηση: Annually inspect the contactor for any signs of physical damage, discoloration, or loose connections.
- Καθάρισμα: Ensure the device is free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Έλεγχος σύνδεσης: Periodically verify that all terminal screws are tight.
Πάντα να αποσυνδέετε την παροχή ρεύματος πριν από οποιαδήποτε συντήρηση.
7. Αντιμετώπιση Προβλημάτων
If the contactor is not functioning as expected, consider the following:
| Σύμπτωμα | Πιθανή αιτία | Δράση |
|---|---|---|
| Contactor does not switch on | No control voltage to A1/A2; Incorrect wiring; Faulty control circuit; Contactor failure | Ελέγξτε τον έλεγχο voltage supply; Verify A1/A2 wiring; Test control circuit components; Replace contactor if faulty. |
| Contactor does not switch off | Έλεγχος τόμοςtage continuously applied; Contacts welded shut; Contactor failure | Check control circuit for continuous voltage; Disconnect power and inspect contacts; Replace contactor if faulty. |
| Υπερθέρμανση | Overload; Loose connections; Insufficient ventilation | Reduce load; Tighten all terminal connections; Ensure adequate airflow in the enclosure. |
For issues not resolved by these steps, contact a qualified electrician or Hager technical support.
8. Προδιαγραφές
| Χαρακτηριστικό | Προσδιορισμός |
|---|---|
| Αριθμός μοντέλου | ESC225S |
| Μάρκα | Hager |
| Rated Current (AC Adapter Current) | 25 Amps |
| Βαθμολογία Voltage | 230 V (Control voltage on device label: 250V) |
| Αριθμός επαφών | 2 Normally Open (2 NO) |
| Υλικό | Copper Aluminum |
| Διαστάσεις προϊόντος (Μ x Π x Υ) | 2.36" x 0.7" x 3.27" (60 x 17.8 x 83 χιλ.) |
| Βάρος | 3.53 ουγγιές (περίπου 100 γρ.) |
| Τύπος τοποθέτησης | Ράγα DIN |
| ASIN | B005ZCP5RG |
9. Εγγύηση και υποστήριξη
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your authorized Hager distributor. Technical support and further assistance can be obtained through the official Hager website or your local service representative.
Hager Official Webτοποθεσία: www.hager.com
