1. Εισαγωγή
The Riello IDG 1200 is a compact and reliable Uninterruptible Power Supply (UPS) designed to protect your electronic devices from power outages and fluctuations. It provides a stable power source, ensuring continuous operation and safeguarding your equipment from potential damage. This manual provides essential information for the proper installation, operation, and maintenance of your Riello IDG 1200 UPS.
This image shows the Riello IDG 1200 UPS unit from a front-side angle. The device is black, compact, and designed for vertical placement. The front panel features the 'Riello iDialog UPS' logo. Ventilation grilles are visible on the side.
2. Ρύθμιση
2.1 Αποσυσκευασία
Carefully remove the UPS from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging for future transport or storage.
2.2 Τοποθέτηση
Due to its compact form factor, the Riello IDG 1200 can be positioned almost anywhere. Ensure the chosen location is:
- Well-ventilated, allowing for proper heat dissipation.
- Away from direct sunlight, heat sources, and excessive humidity.
- On a stable, flat surface.
2.3 Σύνδεση του UPS
- Συνδέστε το καλώδιο τροφοδοσίας του UPS σε μια γειωμένη πρίζα τοίχου.
- Connect your computer, monitor, and other critical devices to the output sockets on the rear of the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's capacity (720W).
- For advanced monitoring and management, connect the UPS to your computer via the appropriate communication port (e.g., USB, if available).
2.4 Εγκατάσταση Λογισμικού (Προαιρετικό)
The Riello IDG 1200 is compatible with various operating systems, including Windows Vista, 2003, XP, 2000, Me, 98, Linux, Mac OSX, and Sun Solaris. For enhanced control and monitoring features, install the Riello UPS management software on your computer. Refer to the software's documentation for installation instructions.
3. Οδηγίες λειτουργίας
3.1 Ενεργοποίηση του UPS
Press and hold the power button on the front panel for a few seconds until you hear a beep and the indicators light up. The UPS will perform a self-test and then enter normal operating mode.
3.2 Powering Off the UPS
To turn off the UPS, press and hold the power button again until the indicators turn off and you hear a final beep. Ensure all connected devices are properly shut down before turning off the UPS.
3.3 Αυτόματη επανεκκίνηση
The Riello IDG 1200 features an automatic restart function. After a power outage and when utility power is restored, the UPS will automatically restart and resume providing power to connected devices, provided the battery has sufficient charge.
3.4 Λειτουργία μπαταρίας
When utility power fails, the UPS will automatically switch to battery mode, providing backup power to connected devices. An audible alarm may sound to indicate that the UPS is operating on battery power. The alarm will typically become more frequent as the battery charge depletes.
4. Συντήρηση
4.1 Φροντίδα μπαταρίας
The UPS contains sealed lead-acid batteries. To maximize battery life:
- Keep the UPS connected to a power outlet to ensure the batteries remain fully charged.
- Avoid storing the UPS in extreme temperatures.
- Perform a battery self-test periodically (if supported by the management software) to assess battery health.
- The typical battery recharge time is approximately 8 hours.
4.2 Καθαρισμός
Clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.
4.3 Αντικατάσταση μπαταρίας
Battery replacement should only be performed by qualified service personnel. Refer to the manufacturer's guidelines for battery replacement procedures and compatible battery types.
5. Αντιμετώπιση Προβλημάτων
This section provides solutions to common issues you might encounter with your Riello IDG 1200 UPS. If the problem persists after attempting these solutions, please contact customer support.
| Πρόβλημα | Πιθανή αιτία | Διάλυμα |
|---|---|---|
| Το UPS δεν ενεργοποιείται. | Δεν υπάρχει τροφοδοσία ρεύματος. Η μπαταρία είναι πλήρως αποφορτισμένη. | Ensure the power cord is securely plugged into a live wall outlet. Allow the UPS to charge for at least 8 hours before attempting to turn it on. |
| Το UPS εκπέμπει συνεχώς ηχητικά σήματα σε κανονική λειτουργία. | Κατάσταση υπερφόρτωσης. | Disconnect non-essential equipment from the UPS until the alarm stops. Ensure total load does not exceed 720W. |
| Το UPS μεταβαίνει συχνά σε λειτουργία μπαταρίας. | Unstable utility power; Sensitivity setting too high. | Check your utility power supply. If using management software, adjust the UPS sensitivity setting (refer to software manual). |
| Σύντομος χρόνος δημιουργίας αντιγράφων ασφαλείας. | Battery is old or not fully charged; Overload. | Allow the UPS to charge for 8 hours. Reduce the connected load. Consider battery replacement if the battery is old. |
6. Προδιαγραφές
| Χαρακτηριστικό | Προσδιορισμός |
|---|---|
| Μάρκα | Riello |
| Αριθμός μοντέλου | IDG 1200 |
| Σειρά | iDialog |
| Χωρητικότητα ισχύος εξόδου | 1200 VA / 720 W |
| Τομtage | 1200 Volts (Input/Output nominal) |
| Χρώμα | Μαύρος |
| Υλικό | Μέταλλο |
| Διαστάσεις προϊόντος | 9.3 x 31 x 27 εκ |
| Βάρος αντικειμένου | 3.7 κιλά |
| Τύπος μπαταρίας | Lead Acid, AGM |
| Χρόνος επαναφόρτισης μπαταρίας | 8 Ώρες |
| Form Factor | Συμπαγής |
| Ημερομηνία πρώτης διαθεσιμότητας | 3 Ιανουαρίου 2012 |
7. Τι υπάρχει στο κουτί
The Riello IDG 1200 package typically includes:
- Riello IDG 1200 UPS Unit
- Καλώδια ρεύματος
- Εγχειρίδιο χρήστη (αυτό το έγγραφο)
- Communication Cable (e.g., USB cable for software connection)
8. Εγγύηση και υποστήριξη
Για πληροφορίες σχετικά με την εγγύηση, τεχνική υποστήριξη ή ερωτήσεις σχετικά με το σέρβις, ανατρέξτε στην κάρτα εγγύησης που συνοδεύει το προϊόν σας ή επισκεφθείτε την επίσημη ιστοσελίδα της Riello. webτοποθεσία. Κρατήστε την απόδειξη αγοράς σας ως απόδειξη αγοράς για αξιώσεις εγγύησης.
Επίσημο Riello Webτοποθεσία: www.riello-ups.com
