Leviton 15 Amp 125 Volt Industrial Grade 4-in-1 Receptacle (Model 1254-R) Instruction Manual

1. Εισαγωγή

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15 Amp, 125 Volt, Industrial Series Extra Heavy Duty Grade, 4-In-1 Receptacle, Model 1254-R. This device is designed for demanding environments requiring high-abuse tolerance, such as healthcare facilities, manufacturing plants, and educational institutions. It features four outlets in a single-gang footprint, offering increased power access without requiring larger electrical boxes.

2. Πληροφορίες Ασφάλειας

ΠΡΟΕΙΔΟΠΟΙΗΣΗ: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

• Always disconnect power before servicing or installing the receptacle.
• Do not install in wet locations unless specifically rated for such use.
• Βεβαιωθείτε ότι όλες οι συνδέσεις καλωδίων είναι ασφαλείς και σωστά μονωμένες.
• Use only copper wire with this device.
• This device is rated for 15 Amp, εφαρμογές 125 Volt. Μην υπερβαίνετε αυτές τις ονομαστικές τιμές.

3. Περιεχόμενα συσκευασίας

The package for the Leviton 1254-R 4-in-1 Receptacle typically includes:

• One (1) Leviton 1254-R 4-In-1 Receptacle
• Mounting Screws (typically two)

4. Προδιαγραφές

5. Εγκατάσταση

Follow these steps for proper installation of your Leviton 4-in-1 Receptacle. If you are not familiar with electrical wiring, consult a qualified electrician.

1. Απενεργοποιήστε την τροφοδοσία: Locate the circuit breaker or fuse that controls the outlet where you intend to install the receptacle. Turn it OFF. Verify that the power is off using a voltagε δοκιμαστής.
2. Αφαιρέστε την παλιά πρίζα (εάν υπάρχει): Unscrew the wall plate and then the mounting screws holding the existing receptacle in the electrical box. Carefully pull the old receptacle out of the box.
3. Αποσύνδεση καλωδίων: Disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
4. Προετοιμασία καλωδίων: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure the wire ends are clean and straight.
5. Συνδέστε τα καλώδια στη νέα πρίζα:
   • Συνδέστε το HOT (Black or Red) σύρμα στο Ορείχαλκος τερματικές βίδες.
   • Συνδέστε το ΟΥΔΕΤΕΡΟ (Λευκό) σύρμα στο Ασήμι τερματικές βίδες.
   • Συνδέστε το GROUND (Green or Bare Copper) σύρμα στο Πράσινος βίδα γείωσης.

   This receptacle supports both back-wiring (inserting wires into holes on the back and tightening screws) and side-wiring (wrapping wires around terminal screws). Ensure connections are tight and no bare wire is exposed outside the terminals.

   

   Εικόνα 5.1: Εμπρός view of the Leviton 1254-R 4-in-1 Receptacle in Red. This image shows the four outlets and the robust construction.
   

   Εικόνα 5.2: Κοντινό πλάνο view of a Leviton receptacle's wiring terminals, illustrating the side-wiring option and the grounding screw.

6. Υποδοχή στήριξης: Carefully push the wired receptacle back into the electrical box. Secure it with the provided mounting screws.
7. Τοποθετήστε την πλάκα τοίχου: Attach the wall plate over the receptacle.
8. Επαναφορά ισχύος: Turn the circuit breaker or fuse back ON.
9. Δοκιμή: Plug a device into each of the four outlets to ensure proper function.

The 1254-R features an interlocking thermoplastic nylon cover and body for enhanced durability and a nickel-plated brass strap with integral ground contacts for reliable grounding. The permanent "Green Dot" marking on the face indicates its hospital/industrial grade compliance.

Image 5.3: Detail showing the "Green Dot" marking, signifying the industrial/hospital grade rating of the receptacle.

6. Λειτουργία

The Leviton 1254-R 4-in-1 Receptacle operates like any standard electrical outlet. Simply insert the plug of your electrical device into one of the four available receptacles. Ensure the plug is fully inserted for a secure connection. The extra heavy-duty, T-type triple-wipe bronze contacts provide maximum performance and a strong grip on cords.

7. Συντήρηση

This industrial-grade receptacle requires minimal maintenance. Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle immediately. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. Αντιμετώπιση Προβλημάτων

9. Πληροφορίες εγγύησης

Leviton products are backed by a limited warranty. For specific warranty terms and conditions applicable to the 1254-R receptacle, please refer to the warranty documentation included with your purchase or visit the official Leviton webτοποθεσία. Κρατήστε την απόδειξη αγοράς για τυχόν αξιώσεις εγγύησης.

10. Υποστήριξη

For technical assistance, product information, or customer support, please visit the official Leviton website or contact their customer service department. Contact details can typically be found on the product packaging or the Leviton webτοποθεσία.

Λέβιτον Webτοποθεσία: www.leviton.com