Βάση αισθητήρα AGILE OFFROAD AO-W3G-X TPMS για INEOS Grenadier

SKU
AO-W3G-X

ΠΕΡΙΛΑΜΒΑΝΟΝΤΑΙ ΑΝΤΑΛΛΑΚΤΙΚΑ

• 1 x AO Z-Bracket
• 1 x ¾” OD Spacer
• 1 x Apex RPV Vale Stem
  (AO-W3G-2: Standard Length RPV Stem)
  (AO-W3G-3: XL Length RPV Stem)

ΧΡΕΙΑΖΕΤΑΙ ΕΡΓΑΛΕΙΟ

• Μηχανή ελαστικών
• Υποδοχή 11mm/Γαλλικό κλειδί
• Υποδοχή 14mm/Γαλλικό κλειδί
• Μπλε Loctite

ΧΡΟΝΟΣ ΕΓΚΑΤΑΣΤΑΣΗΣ
With Tire Mounting and Balancing:
2-3 Ώρες

ΟΔΗΓΙΕΣ

Label each factory wheel/tire LF (left rear), RF (right rear), LR (left rear), and RR (right rear) before removing from vehicle. Remove the factory Ineos Grenadier TPMS sensors from the factory wheels using manufacturer’s recommended procedures. Each factory sensor is programmed from the Ineos factory and are position specific. Install new wheel/tire with factory sensor to the sensor’s factory position.

ΟΔΗΓΟΣ ΕΓΚΑΤΑΣΤΑΣΗΣ

1. Install the Apex RPV Valve Stem on to wheel as shown with the supplied rubber seal on the inside of wheel.
2. Use a 14mm socket/wrench to install supplied valve stem nut. Torque nut to 12 inch-lbs.
3. Assemble the factory Ineos Grenadier TPMS sensor and stem with the AO Z-Bracket using the supplied ¾” spacer and factory valve stem nut. Apply a small drop of blue Loctite to the threads.
4. Install the TPMS sensor and AO Z-Bracket assembly onto the Apex Valve Stem using the supplied nut. Position the sensor against the wheel surface. Apply a small drop of Blue Loctite on threads. Torque nut to 25-45 inch-lbs.
5. To avoid damaging TPMS Sensor, make sure the wheel is positioned correctly on tire machine turntable using the manufacturer’s recommended specs and that proper tire mounting techniques are used.

• agileoffroad.com
• info@agileoffroad.com
• 619-328-1297

FAQ

• Ε: Μπορώ να χρησιμοποιήσω αυτήν τη βάση με οποιεσδήποτε ζάντες aftermarket;
  A: The TPMS Sensor Bracket for INEOS Grenadier is designed to work with aftermarket wheels while allowing the installation of factory Ineos Grenadier TPMS sensors. It is recommended to follow the provided instructions for proper installation.
• Ε: Χρειάζομαι ειδικά εργαλεία για εγκατάσταση;
  A: Yes, you will need a Tire Machine, 11mm Socket/Wrench, 14mm Socket/Wrench, and Blue Loctite for the installation process as specified in the user manual.

Έγγραφα / Πόροι

Βάση αισθητήρα AGILE OFFROAD AO-W3G-X TPMS για INEOS Grenadier [pdf] Οδηγός εγκατάστασης Βάση αισθητήρα TPMS AO-W3G-X για INEOS Grenadier, AO-W3G-X, Βάση αισθητήρα TPMS για INEOS Grenadier, Βάση αισθητήρα για INEOS Grenadier, Βάση για INEOS Grenadier, INEOS Grenadier, Grenadier, Grenadier, Grenadier

Αναφορές

• Εγχειρίδιο χρήστη