1. Εισαγωγή
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and example εφαρμογές.
2. Πληροφορίες Ασφάλειας
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Κρατήστε τη συσκευή μακριά από παιδιά και κατοικίδια.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Never leave the engraver unattended during operation.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Περιεχόμενα συσκευασίας
Βεβαιωθείτε ότι όλα τα αντικείμενα υπάρχουν στη συσκευασία σας:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Λάμπα λέιζερ
- Καλώδιο USB
- Μετασχηματιστής ρεύματος
- Κατσαβίδι
- Test materials (e.g., wood, black plastic sheets)
- User Manual (physical copy)
Σχήμα 3: Παρεχόμενα αξεσουάρ και εξαρτήματα.
4. Οδηγός εγκατάστασης
- Αποσυσκευασία: Αφαιρέστε προσεκτικά όλα τα εξαρτήματα από τη συσκευασία.
- Τοποθέτηση: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Σύνδεση ρεύματος: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- Σύνδεση USB: Connect the engraver to your computer using the provided USB cable.
- Σύνδεση Bluetooth: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Λειτουργία εκτός σύνδεσης: The device supports offline operation once engraving files ανεβαίνουν.
- Εγκατάσταση λογισμικού: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Προσαρμογή εστίασης: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Οδηγίες λειτουργίας
- Προετοιμασία υλικού: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Φοράτε προστατευτικά γυαλιά: Always wear the provided laser goggles before starting any engraving task.
- Διεπαφή λογισμικού:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Προσαρμόστε τις παραμέτρους χάραξης:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Ισχύς λέιζερ: Adjust the laser intensity (e.g., 230, range 0-1000).
- Μέγεθος: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Προview and Position: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Ξεκινήστε τη χάραξη: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Παρακολούθηση: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Ολοκλήρωση: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Συντήρηση
- Καθαρισμός του φακού λέιζερ: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Καθαρισμός της περιοχής χάραξης: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Θύρα εξάτμισης: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Αποθήκευση: When not in use, store the engraver in a dry, dust-free environment.
7. Αντιμετώπιση Προβλημάτων
- Χωρίς έξοδο λέιζερ:
- Check if the power adapter is securely connected and the device is powered on.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Κακή ποιότητα χάραξης:
- Εστία: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Ρυθμίσεις: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Υλικό: Ensure the material is flat and securely placed to prevent movement during engraving.
- Ζητήματα σύνδεσης:
- USB: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Bluetooth: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- Το λογισμικό δεν αποκρίνεται:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Προδιαγραφές
| Χαρακτηριστικό | Λεπτομέρεια |
|---|---|
| Όνομα προϊόντος | TS1 Mini Laser Engraving Machine |
| Main Body Color | Ασημί γκρι |
| Κύριο υλικό του σώματος | Injection molding + aluminum |
| Διαστάσεις προϊόντος (Μ x Π x Υ) | 157 mm x 157 mm x 167 mm (6.22 ίντσες x 6.22 ίντσες x 6.69 ίντσες) |
| Περιοχή χαρακτικής | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Ισχύς λέιζερ | 3W |
| Optimal Focusing Distance | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Καθαρό βάρος προϊόντος | Approx. 1025.7g (±100g) |
| Μέγεθος συσκευασίας | 203mm x 210mm x 196mm |
| Τροφοδοτικό | 12V/2A |
| Κατανάλωση ισχύος εργασίας | 17.5W |
| Bluetooth | Υποστηρίζεται |
| Αποθήκευση TF | Supported (built-in) |
| Θύρα USB | Υποστηρίζεται |
| Ακρίβεια χάραξης | 0.1 mm |
| Μέγιστη ταχύτητα χάραξης | 3000 mm/min |
| Μέγιστη Επιτάχυνση | 320 mm/min |
| Συμβατό λογισμικό | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Ελεγκτής | GRBL |
| Έξυπνη συσκευή | Ναί |
| Πιστοποίηση | CE |
| CNC ή όχι | CNC |
Figure 7: Product dimensions and engraving area.
9. Συμβουλές χρήστη
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Δοκιμή υλικού: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- Αερισμός: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Εγγύηση και υποστήριξη
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
