1. Εισαγωγή
This manual provides detailed instructions for the setup, operation, and maintenance of your MAONO BA37 Heavy Duty Adjustable Metal Suspension Microphone Boom Arm. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Image 1.1: User operating the MAONO BA37 Microphone Boom Arm.
2. Πληροφορίες Ασφάλειας
- Βεβαιωθείτε ότι το γραφείο clamp is securely fastened to a stable surface before attaching the boom arm and microphone.
- Do not exceed the maximum weight recommendation of 5.5 pounds (2.5 kg) for attached equipment.
- Avoid pinching fingers or cables in the arm's joints during adjustment.
- Keep the boom arm away from heat sources and direct sunlight.
3. Περιεχόμενα συσκευασίας
Βεβαιωθείτε ότι όλα τα αντικείμενα υπάρχουν στη συσκευασία σας:
- Heavy-duty microphone scissor arm stand x1
- Upgraded table mounting clamp x1
- 3/8" to 5/8" screw adapter x1
- Ιμάντες καλωδίων x2
4. Οδηγός εγκατάστασης
4.1. Installing the Desk Clamp
- Choose a stable desktop surface with a thickness up to 2.36 inches (6.5 cm).
- Place the upgraded table mounting clamp στην άκρη του γραφείου σας.
- Tighten the screw mechanism until the clamp είναι σταθερά ασφαλισμένο. Το clamp features a 4200mm² surface area and a silicone pad to protect your desk from scratches.
- Το κλamp also includes a convenient headset hook for storage.
Image 4.1: Desk Clamp Installation and Features.
4.2. Attaching the Boom Arm
- Insert the base of the microphone scissor arm stand into the hole on the top of the desk clamp.
- Ensure the arm is seated properly and tighten any locking mechanisms on the clamp για να ασφαλίσετε το βραχίονα.
4.3. Attaching Your Microphone
- If your microphone has a 3/8" thread, use the provided 3/8" to 5/8" screw adapter if your microphone requires a 5/8" thread.
- Screw your microphone or shock mount onto the threaded end of the boom arm.
- Ensure the microphone is securely fastened.
Video 4.2: Official MAONO video demonstrating the installation and secure positioning of the BA37 Microphone Boom Arm.
4.4. Διαχείριση καλωδίων
Use the included cable straps to neatly route your microphone cable along the boom arm, preventing tangles and maintaining a clean setup.
5. Οδηγίες λειτουργίας
5.1. Adjusting the Boom Arm
The MAONO BA37 boom arm features 5 adjustable nodes, allowing for flexible positioning. It offers a horizontal reach of 27.6 inches (70 cm) and a vertical reach of 29.6 inches (75 cm). Adjust the arm to your desired height and angle for optimal microphone placement.
Image 5.1: Flexible Adjustment and Positioning.
5.2. Load Capacity and Stability
The boom arm is constructed from thicker metal, enhancing stability and boasting an impressive load capacity of 4.8 lbs (2.2 kg). Its internal springs ensure silent operation, crucial for professional recording environments.
Image 5.2: Enhanced Load-bearing Capacity.
5.3. Συμβατότητα μικροφώνου
The MAONO BA37 is compatible with a wide range of microphones and shock mounts, including MAONO PD100X, PD200X, PM450, PD400, PM500, Fifine AM8, AmpliGame (A6V, A8), HyperX QuadCast, HyperX Solocast, Shure MV7, Shure SM58, Shure SM7B, AT2020, AT2035, and others.
Image 5.3: Compatibility List for MAONO BA37.
6. Συντήρηση
- Regularly check all screws and joints for tightness. Tighten if necessary to maintain stability.
- Clean the boom arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the silicone pad on the desk clamp is free from debris to maintain grip and protect your desk.
7. Αντιμετώπιση Προβλημάτων
- Το χέρι δεν κρατάει τη θέση του: Ensure all adjustment knobs and the desk clamp are fully tightened. The arm is designed to hold up to 4.8 lbs (2.2 kg); verify your microphone's weight.
- Microphone wobbles: Check that the microphone or shock mount is securely screwed onto the arm's thread. Ensure the 3/8" to 5/8" adapter (if used) is also tight.
- Γραφείο κλamp slipping: Σφίξτε ξανά το κλείστρο του γραφείουamp. Ensure the desktop surface is clean and dry for maximum grip. The silicone pad should be in direct contact with the desk.
8. Προδιαγραφές
| Χαρακτηριστικό | Λεπτομέρεια |
|---|---|
| Μάρκα | ΜΑΟΝΟ |
| Αριθμός μοντέλου | BA37 |
| Υλικό | Κραματοποιημένος χάλυβας, μέταλλο |
| Βάρος αντικειμένου | 3 λίβρες (1.36 κιλά) |
| Σύσταση μέγιστου βάρους | 5.5 λίβρες (2.5 κιλά) |
| Μέγιστο Ύψος | 29.6 ίντσες (75 εκ.) |
| Οριζόντια προσέγγιση | 27.6 ίντσες (70 εκ.) |
| Τύπος βάσης | Upgraded 4200mm² Surface Area Desk Clamp with Soft Pad |
| Desk Thickness Support | Up to 2.36 Inches (6.5 cm) |
| Mount Thread Size | 3/8" to 5/8" screw adapter |
| Συμπεριλαμβανόμενα εξαρτήματα | Heavy-duty microphone scissor arm stand, Upgraded table mounting clamp, 3/8" to 5/8" screw adapter, Cable straps x2 |
9. Εγγύηση και υποστήριξη
The MAONO BA37 Microphone Boom Arm comes with a 1 χρόνια εγγύηση from the date of purchase. For warranty claims, technical support, or any questions regarding your product, please contact MAONO customer service through their official webαπό τον ιστότοπο ή τον πωλητή λιανικής πώλησης από τον οποίο αγοράστηκε το προϊόν. Παρακαλούμε φυλάξτε την απόδειξη αγοράς για την επικύρωση της εγγύησης.