tectake Bar Table with 4 Stools - Industrial Style

Εισαγωγή

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

Οδηγίες Ασφαλείας

• Βεβαιωθείτε ότι όλα τα εξαρτήματα υπάρχουν και είναι άθικτα πριν από τη συναρμολόγηση. Μην το χρησιμοποιείτε εάν λείπουν ή έχουν υποστεί ζημιά κάποια εξαρτήματα.
• Συναρμολογήστε το προϊόν σε μια μαλακή, καθαρή επιφάνεια για να αποφύγετε γρατσουνιές.
• Tighten all screws and bolts securely, but do not overtighten to avoid damaging the material.
• Ελέγχετε τακτικά όλες τις συνδέσεις για να βεβαιωθείτε ότι παραμένουν σφιχτές.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• Κρατήστε τα μικρά εξαρτήματα και τα υλικά συσκευασίας μακριά από παιδιά για να αποτρέψετε τον κίνδυνο πνιγμού.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

Περιεχόμενα συσκευασίας

Before starting assembly, please verify that all the following components are included in your package:

• 1 x Bar Table
• 4 x Σκαμπό Μπαρ
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x Εγχειρίδιο Συναρμολόγησης (αυτό το έγγραφο)

Image: Detailed diagram of product dimensions and included components.

Οδηγίες συναρμολόγησης

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. Αποσυσκευάστε εξαρτήματα: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. Συναρμολόγηση πλαισίου τραπεζιού: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. Συνδέστε την επιφάνεια του τραπεζιού: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assemble Stool Frames: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Attach Stool Seats: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. Εγκατάσταση ρυθμιζόμενων ποδιών: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. Τελική σύσφιξη: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

Οδηγίες Λειτουργίας

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• Σταθερότητα: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• Εξοικονόμηση χώρου: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• Χωρητικότητα φορτίου: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• Τοποθέτηση: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

Συντήρηση

Proper care will extend the life and appearance of your tectake furniture set:

• Καθάρισμα: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Τακτικοί έλεγχοι: Ελέγχετε περιοδικά όλες τις βίδες και τα μπουλόνια για να βεβαιωθείτε ότι είναι σφιγμένα. Σφίξτε τα ξανά εάν είναι απαραίτητο.
• Προστασία: Use coasters or placemats to protect the tabletop from spills, heat, and scratches.
• Περιβάλλο: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

Αντιμετώπιση προβλημάτων

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wobbling Table/Stool:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• Δυσκολία κατά τη συναρμολόγηση:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• Γρατζουνιές ή βαθουλώματα:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

Προδιαγραφές

Εγγύηση και υποστήριξη

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store