Εισαγωγή
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Πληροφορίες Ασφάλειας
Να ακολουθείτε πάντα τις βασικές προφυλάξεις ασφαλείας κατά την εγκατάσταση ή τη χρήση ηλεκτρικών προϊόντων για να μειώσετε τον κίνδυνο πυρκαγιάς, ηλεκτροπληξίας και τραυματισμού.
- Απενεργοποιώ: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Μόνο για χρήση σε εσωτερικούς χώρους: Αυτό το λamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Correct Base: Βεβαιωθείτε ότι η λamp holder is compatible with an E27 base.
- Τομtage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampαπαιτήσεις του.
- Μη ρυθμιζόμενο: Αυτό το λamp is not dimmable. Do not use it with dimmer switches.
- Άνεση ματιών: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Περιεχόμενα συσκευασίας
Η συσκευασία περιέχει:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Οδηγίες εγκατάστασης
- Απενεργοποιήστε την τροφοδοσία: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Αφαίρεση παλιού Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp κάτοχος.
- Εγκατάσταση νέου Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Τοποθέτηση: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Επαναφορά ισχύος: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Οδηγίες Λειτουργίας
Αυτή η Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Αυτόματο On/Off: Το λamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Αισθητήρας φωτός ημέρας: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Αισθητήρας κίνησης: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Ποιότητα φωτός: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Συντήρηση
The Philips LED Lamp with Sensor requires minimal maintenance.
- Καθάρισμα: Βεβαιωθείτε ότι η τροφοδοσία είναι απενεργοποιημένη πριν από τον καθαρισμό. Σκουπίστε τοamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Περιοχή αισθητήρα: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Αντιμετώπιση προβλημάτων
| Πρόβλημα | Πιθανή αιτία | Διάλυμα |
|---|---|---|
| Lamp δεν ανάβει. |
|
|
| Lamp δεν σβήνει. |
|
|
| Sensor sensitivity seems low. |
|
|
Προδιαγραφές
| Χαρακτηριστικό | Λεπτομέρεια |
|---|---|
| Μάρκα | Philips |
| Αριθμός μοντέλου | 929002058731 |
| Τύπος Φωτός | LED |
| Wattage | 8 Watt |
| Ισοδύναμο πυρακτώσεως | 60 Watt |
| Lamp Βάση | Ε27 |
| Ανοιχτό Χρώμα | Ζεστό λευκό |
| Θερμοκρασία χρώματος | 2700 Kelvin |
| Φωτεινή ροή | 806 Lumen |
| Τομtage | 100-240 Volt |
| Συχνότητα | 50 Hertz |
| Ειδικά Χαρακτηριστικά | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Εσωτερική/Εξωτερική χρήση | Εσωτερικός |
| Διάρκεια ζωής | 15,000 Ώρες |
| Διαστάσεις (Υ x Π) | 12.2 cm x 6.25 cm |
| Υλικό | Πλαστική ύλη |
Εγγύηση και υποστήριξη
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Διαδικτυακή υποστήριξη: Επίσκεψη www.philips.com/support για συχνές ερωτήσεις και επιλογές επικοινωνίας.